VEVOR Copper Pipe Bender, 7 Colorful Dies 1/4-7/8 inch 90 Degrees Forward and Reverse Bending, 6-22 mm for Copper & Aluminum Tubes with Reverse Bend Attachment

1/4"-7/8" Tube Bender Kit

7 Colorful Dies & 1/4"-7/8" & Reverse Bending

The copper tubing bender is designed to bend copper, aluminum, and thin-walled steel pipes with 90° forward and reverse bending. The product is equipped with 7 dies of different sizes, making your work more convenien. A plastic carrying case is included, designed for more accessible storage.

• 90° Reverse Bending
• 1/4"-7/8" Bending Range
• Durable Aluminum Alloy
• Compact & Easy Operation

Key Features

• 90° Reverse Bending: The ratcheting tube bender can easily bend the diameter of 1/4 to 7/8 inch (6-22 mm) tubes both forward and reverse to 90 degrees. It allows tight 90-degree angles to be made easily out of a wall or other difficult places. Mechanical ratchet for fast and precise bending.
• 1/4"-7/8" Bending Range: We provide 7 colorful interchangeable tube bender dies, ranging from 1/4" to 7/8". All these are made of reinforced aluminum alloy for durable use. The bending heads can meet different usage needs, making your work more convenient.
• Durable Aluminum Alloy: The compact bender kit is made of high-quality aluminum alloy, which is corrosion-proof. Our tubing bender with good processing performance is widely used and sturdy for long service life.
• Compact & Easy Operation: Tube bender allows bending in confined spaces and takes up little space because of its compact design. And the bender, with an ergonomic handle, is effortless to operate. Carrying box for easy storage and portability. The bender can be set up in a breeze.
• Wide Application: The reverse tubing bender is suitable for copper, aluminum, thin-walled steel tubing, etc. It is widely used in sanitary and heating installations, floor heating, refrigeration and air-conditioning, and hydraulic systems.

	90 Degrees Bending Angle The pipe bender can easily bend copper, aluminum, and thin-walled steel tube to 90 degrees. And our product features both forward and reverse bending. A different direction depends on your need.		7 Tube Bender Heads The sizes of 7 tube bending dies are 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8". And various dies will meet your precious bending. Different colors of dies represent different sizes, making you find what you need at a glance.		High-Quality Pipe Bender The ratcheting tube bender is made of superior aluminum alloy, featuring rust-proof. In addition, it is sturdy and durable.
	Ergonomic Design The compact bender kit with an ergonomic handle is easy to use and energy-saving. It is suitable for one-handed operation and long work hours without tiredness.		Installation Without Effort The installation of reverse tubing bender: first place crossbar and radius block, then push handle making block into the ready position, finally, place tube between bar and block.		Various Usage Pipe bender is widely used for sanitary and heating installations, floor heating, refrigeration and air-conditioning, hydraulic systems. It is better for copper, aluminum, and thin-walled steel tubing, etc.

	Specification Model: CT-999RF Material: Aluminum Alloy Dies Size: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" (8/6/10/12/16/19/22 mm) Max. Bending Angle: 90° Max. Bending Force: 10 KN
	Package Content 1 x Tube Bender 2 x Fixed Supports 7 x Tube Bender Heads 1 x Carrying Box 1 x Cutter 1 x Deburrer