VEVOR Pipe Tube Bender, 1/4" (6.35 mm), 3/8" (9.5 mm), 1/2" (12.7 mm) OD, 3 in 1 Manual Lever Tube Bender, 180° Copper Aluminum Pipes Bending Tool for Automotive Repair, HVAC Air Conditioning

3 in 1 Pipe Tube Bender

Achieve Smooth and Precise Pipe Bending

VEVOR lever tube bender is ideal for bending copper, aluminum, thin steel, and stainless steel pipes with a 0.5-1.2mm wall thickness. It supports 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) pipe diameters, allowing precise 0-180° bending with even force distribution.

• 3 in-1 Design
• Wide Applications
• 0-180° Bending
• Lightweight and Portable
• Effortless Operation

Achieve Smooth and Precise Pipe Bending

VEVOR lever tube bender is ideal for bending copper, aluminum, thin steel, and stainless steel pipes with a 0.5-1.2mm wall thickness. It supports 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) pipe diameters, allowing precise 0-180° bending with even force distribution.

Key Features

• 3-in-1 Design: This VEVOR tube pipe bender supports 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) pipes. It features a 40cm handle for even force distribution, reducing the risk of pipe deformation, flattening, or compression
• Wide Applications: Suitable for bending copper/aluminum/thin iron/thin stainless steel tubes with a wall thickness of 0.5~1.2mm. Note: If the tube wall thickness is less than 0.5mm, the pipe may be damaged
• 0-180° Bending: The lever pipe bender features clear angle scales and allows precise bending from 0° to 180°, ideal for automotive repair, HVAC maintenance, and copper pipe DIY projects
• Lightweight and Portable: Made of high-quality aluminum alloy, the tube bender is lightweight and portable. And the ergonomic rubber handle provides a comfortable, non-slip grip
• Effortless Operation: To bend pipes, adjust the tube hook to the corresponding position and insert the pipe into the appropriate bending groove and pipe hook. Then, hold the non-slip handle with both hands and press evenly with force

	Specification Bending Angle: 0°-180° Applicable Pipe O.D.: 6.35 mm, 9.5 mm, and 12.7 mm (1/4 inch, 3/8 inch, and 1/2 inch.) Pipe Wall Thickness: 0.5-1.2 mm Main Material: 45# Steel + Aluminum Alloy + ABS + TPU Net Weight: 2.42 lbs/ 1.1 kg Applicable Pipes: Copper Pipes, Aluminum Pipes, etc Product Size: 17.3 x 3.94 x 3 in / 440 x 100 x 75 mm
	Package Content 1 x Level Tubing Bender 1 x Instruction Manual