VFD Frequency Converter 1 phase AC 200V-240V input 3PH 0-240V 4kW output for motor

Features:1. Reliable Operation: Utilizing an excellent motherboard and a comprehensive patch design, this variable frequency drive (VFD) provides good protection and stable operation.
2. Simple Operation: Equipped with a digital display and keypad, the VFD is very convenient to use, offering higher working efficiency.
3. Built-in Cooling Fan: The integrated cooling system with a large fan blade ensures rapid heat dissipation, low noise, and highly reliable operation.
4. Smart for Expansion: Comes with RS485 communication and a built-in braking unit that can be connected to a braking resistor for emergency stopping.
5. Flame Retardant ABS: Industrial grade ABS material is flame retardant and very sturdy against heat and impact, very durable for long time use.

Specifications:

Item Type: Variable Frequency Drive
Material: ABS
Storage Temperature: -25℃ ~ +55℃
Input Voltage: 1 Phase 220-240V AC. Output voltage: three-phase 0-240 V AC.
Output current: 15A
Applicable braking resistor power: 1000W
Applicable braking resistor: 75Ω

Package list:

1 x frequency inverter
1 x user manual

Note:

1. Before wiring, please confirm whether the input power is turned off.2. The wiring operation should be carried out by professional electrical engineering personnel.3. The grounding terminal must be grounded.4.After completing the wiring of the emergency stop circuit, be sure to check whether the action is effective.5. The output line of the frequency converter should not be connected to the case, and the output line should not be short-circuited.6. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the frequency converter.7. Do not perform a voltage withstand test on the frequency converter.8. Please connect the brake resistor according to the wiring diagram.9. Do not connect the power cord to the U, V, W output terminals.10. Do not connect the contactor to the output circuit.11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power supply.12.Select the frequency inverter with reset and retry function and keep it away from mechanical equipment.Because the alarm will suddenly restart when it stops.The alarm can only be reset after confirming that the operating signal is broken.When the alarm is reset while the operating signal is present, the inverter may start suddenly.Do not touch the inverter terminals.There is high voltage at the terminals, which is very dangerous.Do not modify the wiring or disconnect the terminals while the device is powered on.Disconnect the main power supply before inspection.