Voltmeter with LCD Display, 12V Ammeter Tester Indicator, Voltage Current Power Supply Digital DC Power Supply 6.5 - 100V 100A Voltamp Watt Multimeter

[4 in 1 Multimeter] This digital DC voltmeter ammeter is used to measure voltage, current, energy and active power of electrical devices. It has passed CCC, FCC, CE certification.

[Measuring range] Voltage test range: DC 6.5~100V, current test range: 0~100A, active power test range: 0~10kW, energy test range: 0~9999kWh. Please DO NOT exceed the rated parameters.

[More function] Large LCD screen with backlight; voltage alarm function; power reset function; Data storage when power off.

[Wide application] This DC voltmeter is suitable for indoor use and cannot be used outdoors. It can be used to monitor volt, amp, power and energy consumption of battery, solar system, electric bike generator and other areas.The load cannot exceed the rated voltage and current.

Product Description

Voltmeter Amperemeter Tester Indicator Voltage Current Power Energy Digital DC 6.5-100V 100A Volt Ampere Watt Multimeter LCD Display Panel

Function for measuring electrical parameters (voltage, current, active power, energy). Voltage test range: DC 6.5-100V, Current test range: 0-100A, Power test range: 0-10kW, Energy test range: 0-9999kWh.

Voltage alarm function (overvoltage alarm threshold, backlight and voltage flashing at alarm).

The key reset function energy.

Store data when power off.

Large LCD screen (display voltage, current, active power and energy at the same time)

Backlight function.

Packing: 1* dC meter, 1* manual.Please note that the package does not have external shunt, if you want it with shunt, please see our other models: 100A+ 50A/75mV shunt and 100A+ 100A/75mV shunt.

Function

Backlight ControlPress the key to turn the backlight on or off. The backlight state will be saved when power off.Reset energyHold the key for 5 seconds until the number flashes, then release the key.Press the key again, then the energy value is cleared and exit the reset flashing state.If you don't want to clear, press and hold the key again for 5 seconds until the number does not flash, that means the energy value is not cleared and will exit the reset state. Voltage alarm Hold down the key until the power display area shows SET, release the key. The voltage area displays the current high voltage alarm value, the current area displays the current low voltage alarm value and the last digit starts flashing. Press the key to adjust the value. It will automatically change the digit without operation for 3 seconds, then press the key to adjust the value as well. Voltage alarm threshold setting range: 6.5V-99.9V. After completing the settings, press and hold until the display shows PASS.

-Contact our customer service in case you need further assistance