Wall stud detector with LCD screen and automatic audible warning, 6-in-1 electronic detector for detecting studs, wires, pipes, wood and metal

Product Description

【6-in-1 Multifunctional Detection】: The wall scanner offers 5 scanning modes: 12 mm, 25 mm, and 38 mm in stud detection mode. It locates the center and edges of metals up to 60 mm deep and detects unshielded live electrical wires up to 51 mm deep. In addition to the 5 scanning modes, the stud finder is also compatible with non-magnetic metals, such as aluminum and copper pipes. It thus meets all your detection needs.

【Fast and Accurate Detection】: The edge detector allows for precise detection and prevents hazards when installing TVs, cabinets, garage shelves, etc., on the wall. This plaster stud finder is a portable instrument for quickly locating the edges and center of metal studs, pipes, electrical cables, and magnetic metals concealed in ceilings, walls, and floors. Rapid detection saves time and energy while ensuring optimal efficiency.

【Automatic Audible Alarm and Scale Display】: The stud finder displays an audible signal and a centering icon on the LCD screen. A short beep sounds once calibration is complete, allowing you to begin scanning. As you approach the edge or center of the detected target behind the wall, a continuous beep sounds, and the signal bar intensifies as you approach the center of the stud, pipe, metal, or electrical cable.

【Easy to Use】: Mode button in the center of the detector and SCAN button on the left side. You can switch between five different scanning modes in minutes simply by pressing the MODE button. The non-slip grip and large LCD screen provide a comfortable and convenient scanning experience. Remember to calibrate the stud finder before each scan to reduce errors and inaccuracies and ensure the detection of hidden objects in the wall. This wall stud finder features a sensitive chip and advanced technology, offering maximum accuracy and reliability. Easy to use, whether you're a professional or a beginner, this tool makes a great gift for a man, boyfriend, husband, or DIY enthusiast. This is the ideal gift for Father's Day, a birthday, Christmas, or an anniversary.

Stud Scanning Mode

Three different depths are available in stud detection mode: 12 mm (1/2 inch), 25 mm (1 inch) and 38 mm (1.5 inch). First, select "StudScan" mode, place the detector on the wall, and press the detection button on the side of the tool to calibrate it. The stud finder will indicate the stud's location with a beep, a flashing light, or a visual display. For more accurate measurements, begin your scan in 12 mm (0.5 inch) mode.

Note: Be sure not to move the scanner during calibration, and calibrate the tool on the wall before each scan.

Metal Scan Mode

In this mode, the stud finder is allowed to locate magnetic metal with a maximum depth of 2.3 inches (60 mm).

Note: When magnetic metal is detected, the screen displays a magnetic mark; When the detected metal is not a metal, the screen displays a non-magnetic mark.

AC Scan Mode

In this mode, unshielded AC power wires and electrical wires will not be detected deeper than 2 inches (51 mm), in concrete, enclosed in conduit, behind a shear wall of plywood or metal wall cladding, or if moisture is present in the environment or the scanned surface.

It is important not to move or shake the scanner during calibration and to wait a few seconds for it to finish. If you choose Stud mode, calibrate the tool on the wall to be detected before each scan. In AC/Metal mode, hold it in the air to calibrate it.

If the stud finder is lifted off the wall or shakes, it must be recalibrated; Otherwise, it will affect the analysis result. If the stud is deeper than the selected mode, the full bars will not be displayed on the screen. Set the device to Deep Scan mode, recalibrate it, and restart the scan.

Complete Package

The stud scanner comes with a 9V battery and an instruction manual, packaged in a single box.

Calibration Button

Press the MODE button to change the scanning mode, then calibrate the stud finder by pressing the button on the left. During calibration, the signal bars gradually decrease and a short beep sounds to confirm the end of calibration.

Anti-slip Design

The overall shape design conforms to the ergonomic handle, and the anti-slip design adds comfort and convenience for the user.

Back Protection Set

Back protection adjustment to prevent scratching the stud finder when searching along walls.

For best results, it is important to hold the stud finder correctly and move it slowly. To avoid any surprises, remember that studs or joists are usually spaced 41 or 61 cm (16 or 24 inches) apart and are 38 mm (1.5 inches) wide. Any element closer together or of a different width may not be a stud, joist, or firestop.

Tips: Do not rely solely on the stud finder to locate items behind the scanned surface. Use other sources of information to help you locate items before entering the surface.