Wall-mounted supply elbow with shower head holder, 1/2″ square brass shower hose connector, Drop Ell Union wall water outlet, black

Description:
This 12V 10A relay offers high control power and stable performance. Thanks to its push-button design, one switch can be controlled by multiple remotes, or one remote control by multiple switches. Its high-quality chip and double-sided printed circuit board ensure increased durability and compatibility. The wireless signal learning function gives the relay excellent resistance to interference.

Features:
Ideal relay for replacing a lost or damaged relay.
Momentary, self-locking, interlocking, 3 commands.
Range of the Remote control range: 200 to 500 meters.
One switch can be equipped with several remote controls, or one remote control can be used with several switches.
This relay is stable, durable, and compatible.

Specifications:
Type: 12-Channel Remote Control
Output Current: 20A
Output voltage: 125 V AC / 14 V DC
Operating voltage: 12 V
Battery type: 1 x 23 A/12 V battery (not included)
Operating frequency: 315 MHz - 433 MHz
Remote control range: approximately 200 to 500 m
Operating temperature: -40°C to +80°C Receive sensitivity: ≥105 dBm
Operating modes: Momentary, Self-locking, Interlock
Relay dimensions: approx. 10 x 8 x 2.5 cm
Remote control dimensions: approx. 12 x 5 x 1.5 cm / 4.72 x 1.96 x 0.59 inches
Weight: 243 g

Operating Mode:
Momentary: Press each button on the switch to connect the corresponding relay. Release the switch to close the corresponding relay. You can only connect one relay at a time.
Latching: Press each button on the switch to connect the corresponding relay. Then press the other button to connect the corresponding relay. The other relay is closed. You can only connect one relay at a time.
Self-locking : The same button controls one relay. One press opens it, another closes it. Two independent controls.

Operating mode and switching instructions:
Momentary: Press the "3" button on the switch to activate all 12 relays. Press the "1" button on the switch to open the corresponding relay A1. Release it to close relay A1. All relays are compatible with this operating mode.
Locking: Press the "6" button of the switch to lock the 12 relays. Press the "1" button on the switch to open and hold the corresponding relay A1, then press the "2" button to close the other 11 relays. Relay A2 will open and hold, operating sequentially.
Automatic Locking: Press the "9" button on the switch to lock the 12 relays. Press the "1" button on the switch to open and hold the corresponding relay A1, then press the "1" button again. to close relay A1. This operation is independent of the other buttons. All 11 relays function in this way.
Learning: Press the learn button on the receiver. Press the switch button to activate learning after the beep. Learning is successful when the receiver receives the beep and the beep sounds.
Erasing: Press and hold the learn button on the receiver for approximately 10 seconds until the beep. The stored information is erased.
Contents:
1 12-channel relay
1 remote control