Water pump, ultra-quiet high-pressure transfer pump DC 12V 60W, portable electric sump pump for vehicle modification purification

Features: 1. With a pressure switch, it will automatically shut off when the water outlet pressure is sufficiently high and restart when the pressure drops. 2. The mounting feet are made of rubber instead of rigid plastic, providing good vibration isolation. 3. Built-in pressure switch; it automatically turns on and off when you turn your faucet or nozzle on and off. 4. The water inlet and outlet interface connects to a PE or PU silicone hose. 5. This type of product can be applied in situations requiring energy savings and frequent switching, such as washing machines, supplying water to a solar power system, and remote automatic control systems for water transport and water supply suspension, etc. Specifications: Description: This high-quality DC micro-diaphragm pump with a pressure switch will automatically shut off when the water outlet pressure is sufficiently high. And it runs again when the pressure drops. It's not a good idea to let this pump run dry for too long. This type of product can be applied in situations requiring energy savings and frequent switching, such as washing machines, supplying water to a solar power system, and remote automatic control systems for water transport and water supply suspension, etc. >Features: 1. With a pressure switch, it will automatically shut off when the water outlet pressure is sufficiently high. And it runs again when the pressure drops. 2. The mounting feet are made of rubber instead of rigid plastic, which provides fairly good vibration isolation. 3. Built-in pressure switch; it automatically turns on and off when you turn your tap or nozzle on and off. 4. The water inlet and outlet interface connects to a PE or PU silicone hose. 5. This type of product can be applied in situations requiring energy savings and frequent switching, such as machine washing, supplying water to a solar power system, and remote automatic control systems for water transport and water supply suspension, etc. >Specifications: Voltage: DC12V Power: 60W Flow rate: 5L/min Maximum operating pressure: 116 psi (0.8 MPa) Suction lift: 1.5 meters Pump lift: 50 meters Size: approx. 9.9 x 16.7 cm / 3.9" x 6.6" Line length: approx. 29 cm / 11.4" Outer diameter of interface: approx. 10.8 mm / 0.4" Inner diameter of interface: approx. 6 mm / 0.2" Package Weight: 688 g Application: Widely used in general industrial equipment, chemical equipment, agriculture (lawn and garden), vehicle modification, vehicle cleaning, water purification and treatment equipment, and other industries. Instructions: 1. The direction with the small arrow on the water pump is the water outlet. 2. The wires are not divided into positive and negative poles. 3. The pump can be placed in any direction. Package Included: 1 x Self-Priming Pump Note: 1. Do not immerse in water. 2. The pressure adjustment screw cannot be adjusted arbitrarily. The pressure was set before leaving the factory. The cut-off pressure can be precisely adjusted (the center screw on the black plastic cover on top of the pump, clockwise). (clockwise to increase the cut-off pressure, counterclockwise to decrease the cut-off pressure) 3. Impurities cannot be pumped, otherwise the pump will easily clog and the pressure will drop until there is no more water. 4. The shorter the inlet hose, the better; the longest should not exceed 1.5 meters, and the outlet hose can be as long as possible (within the Yangcheng range). Use a tube with an inner diameter of 8 mm and an outer diameter of approximately 12 mm. 5. Do not pump strong acidic or strong alkali liquids. Common faults and troubleshooting: 1. When the pump is not working, check if the two wires behind the motor are loose. 2. When the diaphragm pump is not used for a long time, the pump head has no suction. Simply put a few drops of water in the pump port and run it for a few minutes. minutes, and it can be used normally when the sound changes. Package list: 1 x self-priming pump