Water pump with G3/4-G1/2 thread, adjustable flow sensor, automatic pressure control switch, 220V

Features: 1. Stable performance; the induction chamber, magnetic control chamber, and electronic components are designed separately to prevent switch failure caused by magnetically adsorbed ferrous material in the pipeline. 2. High-temperature resistant materials allow the product to be used with both hot (up to 70°C) and cold water. 3. Low water pressure start; the reset spring is made of high-quality stainless steel; it can start the pump when the water pressure is > 0.03 kg. 4. The electronic components, used as a control device, will not cause sparks during operation, making it completely safe. 5. This product is widely used in low-pressure areas, particularly important for low-pressure water heater start-up and automatic water cycling in solar water heaters. Specifications: When the water equipment is turned on, water will flow through the pipeline. The water pulse induction gate rotates in the direction of the water flow, and the magnetic control device rotates together. This triggers the sensing elements when it reaches a certain position, turning on the domestic pipeline booster pump. When the water flow is interrupted, the induction gate, driven by the reset spring, moves the magnetic control device to a specific position, turning off the pump. Features: Stable performance; the induction chamber, magnetic control chamber, and electronic components are designed separately to prevent switch failure caused by ferrous material in the pipeline that is magnetically adsorbed. High-temperature resistant materials allow the product to be used with both hot (up to 70°C) and cold water. It features low water pressure start; the reset spring is made of high-quality stainless steel and can start the pump when the water pressure is greater than 0.03 kg. The electronic components used as a control device will not cause sparks during operation, making it completely safe. This product is widely used in homes with low water pressure, particularly for low-pressure water heater ignition and automatic water cycling in solar water heaters. The sensitivity of this flow switch is adjustable. Specification: Model: HT-200 Rated Voltage: 220V Overload Current: 1.5A Connection Thread: G3/4-G1/2 Suitable Liquid: Water or other liquid with similar physical and chemical properties Liquid Pressure: Liquid Temperature: Weight: 169g / 5.6oz (approx.) Package List: 1 * Flow Controller (with gasket)