Waterproof wind charge regulator 12/24V – Power 300W/600W – IP67 protection – Automatic battery control

1. 100% brand new and high quality.
2. This controller controls the wind turbine to automatically charge the battery.
3. When the battery is full, the fan is braked by the automatic control of the internal circuit. When the battery voltage drops to recovery voltage, the fan resumes charging the battery, protecting the fan and the battery.
4. The rectifier and brake circuit part of the controller adopts integrated module design.
5. Fully waterproof, fully waterproof and fully waterproof protection, with a protection level above IP67

Specification:

Features:
1. 100% brand new and high quality
1. This controller controls the wind turbine to automatically charge the battery.
2. When the battery is full, the fan is braked by the automatic control of the internal circuit.When the battery voltage drops to recovery voltage, the fan resumes charging the battery, protecting the fan and the battery.
3. The rectifier and brake circuit part of the controller adopts integrated module design.
4. Fully waterproof, fully waterproof and fully waterproof protection, with a protection level above IP67.

Specification:
Condition: 100% new
Model: FW12/24
Battery rated voltage: 12/24V
Wind turbine rated power: 300W/600W
Brake starting voltage (factory value): 14.4V/28.8V
Brake recovery voltage (factory value): 13.2V/26.4V
Display mode: Led (light emitting diode display)
Operating temperature and humidity range: -35℃-+75℃
Quiescent current: ≤15 mA
Protection level: IP67
Weight: approx. 255g / 9.0oz
Size: approx.100 * 87 * 28 mm / 3.9 * 3.4 * 1.1 inch

Wiring:
1. Connect the positive and negative terminals of the battery to the positive (red) and negative (black) terminals of the battery.
2. Connect the three-phase output voltage of the wind turbine to the three-phase input terminal (green line) of the fan of the controller.

Package list:
1 * wind turbine controller

Note:
1. Check that the output voltage of the wind turbine matches the rated voltage of the battery.
2. Wiring sequence: first connect the positive and negative poles of the battery, then connect the three-phase voltage output of the fan. Please connect the battery and the wind turbine to the controller in strict accordance with the instructions.If the polarity is reversed or the wrong position is connected, the system will work abnormally and even completely damage the controller.
3.Please note that the new type and old type of this product will be sent randomly, and make sure you do not mind before ordering.

-Contact our customer service in case you need further assistance