Wind sensor, aluminum alloy wind speed sensor 4-20mA Wind speed detector wind anemometer

1. The surface is treated by electroplating and spraying, which is corrosion-resistant and ingress-resistant, and will not rust over a long period.
2. With a moisture-proof and corrosion-resistant aluminum alloy casing, high-precision measurement, and a wide measurement range, it is a special meteorological measuring tool.
3. The innovative design features 360-degree wind speed measurement, low power consumption, stable performance, and accurate measurement.
4. The stable base improves load-bearing capacity and anti-interference capabilities, ensuring measurement accuracy.
5. Equipped with high-quality aviation cable connectors, it has excellent anti-corrosion and anti-erosion properties.
6. Black shielded wire, four-conductor cable, waterproof, oil-resistant, strong anti-interference capability, and stable signal transmission.
7. Small size, lightweight, reduces friction, improves sensitivity, ensures measurement accuracy.
8. It is widely used for measuring wind direction in greenhouses, environmental protection, weather stations, ships, aquaculture, and other applications.

Specification:

Condition: 100% Brand New
Item Type: Wind Sensor
Material: Aluminum Alloy, Polycarbonate
Output Signal: 4-20mA
Wind Speed ​​Measurement Range: 0-30m/s
Wind Speed ​​Measurement Accuracy: +1 m/s
Response Time: Baud Rate: 2400/4800/9600
Power Consumption: Operating Temperature: -30 - 80°C
Operating Temperature Environment: 0-100% RH (15-95% RH)
Weight: Approx. 356g / 12.6oz
Height: Approx. 12.4 cm / 4.9 inches
Wiring Instructions:
Brown: Positive power supply (12-24V)
Black: Negative power supply
Yellow: 485-A
Blue: 485-B
Application: Wind speed measurement for power plants, wind speed and direction measurement for weather monitoring, wind speed and direction measurement for navigation and aviation, wind speed and direction measurement for intelligent agricultural wind speed and direction measurement
Installation Method:
1. Ensure the mounting bracket is parallel to the ground;
2. Install with the flange and secure with a bolt to the bracket;
3. Connect the air intake connector to the sensor's air intake through the designated air passage hole.

Package List:

1 x Wind Sensor, 1 x Cable, 1 x Bag of Screws

Note:

1. Please allow a 0-1 inch error due to manual measurement. Thank you for your understanding. 2. Monitors are not calibrated the same way, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. 3. Please note that the new and old types of this product will be sent randomly, and make sure you do not mind this before ordering.