x 360° 16-Line Self-Balancing Green Rotating Laser Level Tool for Vertical and Horizontal Leveling, IP54 Waterproof, 2 x 2400 mAh Batteries, with Tripod

Features: Laser Level: Compact size, lightweight and portable, durable ABS housing makes this laser level perfectly resistant to shocks, wear, and impacts. Utilizes 4 high-precision green laser sources for millimeter leveling, with higher brightness, strong penetration, adjustable thickness and brightness, and the light is clearly visible both indoors and outdoors. Outputs 16 horizontal and vertical laser lines visible separately or simultaneously for finer positioning, with a 3° self-leveling system for great flexibility and stability. Equipped with a self-test calibration function, automatic leveling ≤3°, but if the angle is greater than 3°, the laser light will continue to flash and the laser level will beep to remind you to reset it on a flat surface. It features a tilt mode, allowing you to position the laser at any angle to create angled lines without flickering or beeping. The digital display control panel and touch buttons clearly show the battery power, making it convenient to monitor the remaining battery power in real time so you can recharge or replace it promptly. The laser level's base has a 1/4-inch thread for easy connection. It can also be used with a tripod (not included) via a 1/4-inch to 5/8-inch threaded base (included) or a 1/4-inch to 5/8-inch adapter (included) to adjust the working height. An air bubble indicator helps you determine the orientation and check if the laser level is horizontal. Supports adjustment of the number and brightness of laser lines, making it suitable for both indoor and outdoor use, with continuous and pulsed laser modes. "V" = vertical line, "H" = horizontal line. You can easily adjust the number of laser lines by briefly pressing the "V" or "H" button, and by pressing and holding the "V" button to decrease the brightness and the "H" button to increase it. The remote control features a sleek design with ergonomically designed buttons that are wear-resistant, offering high-sensitivity line mode switching and line brightness adjustment, and a comfortable grip. The T-shaped bracket has a 7mm wall mounting distance and a 360° rotating fine-tuning mechanism, 90° up-and-down adjustment, and a 50mm fore-and-aft adjustment range. All these features allow the machine to quickly locate the target (1/4-inch screw size). The laser level lifting stand features a height-adjustable design with a maximum adjustment range of 65mm. Its anti-slip texture increases friction for more stable placement. It comes with a wear-resistant and shock-resistant plastic carrying case, making it easy to transport and providing quick and convenient storage in complex environments. The tripod stand is made of reinforced aluminum alloy and ABS plastic, offering a sturdy construction with good load-bearing capacity that is not easily deformed or broken. With three adjustable height settings, the tripod consists of three high-precision quick-release levers and an extended center column to meet your various needs. It is equipped with a bubble level to help you check if the tripod is horizontal, and measurements are more accurate when used with a level. A telescopic rocker bar allows for easy height adjustment and 360° rotation, enabling smooth and effortless horizontal and vertical tilting to any angle. With a toggle locking system to control the extension length and locking mechanism, 60° rotating base, 2 batteries, 1 battery adapter, 1 wall mount, 1 ironing board, 1 clamp holder, 1 lifting platform, 1 1/4 inch to 5/8 inch adapter, 1 remote control, 1 carrying case, 1 tripod stand