XD-2048 Controller of temperature of switch of thermostat of micro-computer LED digital (12 V)

Features:

1. This controller of temperature to display digital delicate can adjust the mode Celsius or the mode Fahrenheit

2. The regulator of temperature has the feature of high precision, high sensitivity, high stability

3. Wide range of measured of temperature of -50 ℃ to 110 ℃ and takes in load the protection against the high temperatures

4. Can be installed directly or integrated in a panel of equipment of control industrial, practical and fast

5. Widely used in the area of hatching, the mallette of equipment, the system of air conditioning, the protection of the control of the temperature and of other fields

Specifications:

Features :

This delicate controller of temperature to display digital can set the mode Celsius or the mode Fahrenheit.

The controller of temperature has the features of a high precision, d'udoes sensitivity high and of a stability high.

Wide range of measured of temperature of -50 ℃ to 110 ℃ and takes in load the protection against the high temperatures.

Can be installed directly or integrated in a panel of equipment of control industrial, practical and fast.

Widely used in the area of hatching, the housing of equipment, the system of air conditioning, the protection of the control of the temperature and of other fields.

Specifications :

Voltage of input : DC12V, DC24V (in option)

Range of measured of the temperature : - 50 ℃~110 ℃

Ratio of resolution : -9,9 ℃-99,9 ℃--0,1 ℃, other intervalles of temperature : 1 ℃

Precision of measured : 0,1 ℃

Precision of control : 0,1 ℃

Precision of difference of return : 0,1 ℃

Rate of rafraichissement : 0,5 S

Protection against the high temperatures : 0 ~ 110 ℃

Input of measured : sensor waterproof NTC (10 K 0,5 %)

Output : relay 20 Has

Requirements approx.nementales :

Requirements of temperature : -10 ℃ ~ 60 ℃

Requirements of moisture : 20 % ~ 85 %

Size : 4,8 x 2,8 cm / 1,89 x 1,10 inches

Current static : ≤ 35 MY

Pickup current : ≤ 65 MY

Methods of use :

After the connection to l'Power Supply and to the load (in you refer at the schema of wiring), you can power supply the controller, the red color manifeste for measured the temperature, the blue color following (or red) as needed for adjust the temperature. In the case of a temperature actual and please press on the button Set, the texte of adjustment digital following turn signal and the temperature, after have completed the adjustment, please attendre 3 seconds, it reviendrautomatically. , to this moment-there, the controller disconnect automatically the relay depending on the temperature predefinie, this sensor can meet to all output of charges of power IMPORTANT, Please make sure that the line is correctly. The description of the condition of the light and of the tube digital :

Light : the stop means that the relay is disconnect and the indicator light normal on indicates that the relay is closed.

Tube digital : the signe LLL is the circuit open of the sensor and the signe HHH means that at the-dela of the range of measured, the controller disconnect of force the relay, the signe --- means a protection against the high temperatures.

The description of the function of settings :

Please press on the button SET five seconds, then it can access at the menu principal of adjustment, in press on STC(+) and C/F (-) for pass to P0-P8.

To propos of the adjustment of settings P0-P8, when you unscrew adjust P0, please of first press on STC (+) and C/F (-) at the same time, and the figure P0 turn signal, second, please press on STC (+) and C/F (-) for adjust, if it is made, finally please press on STC (+) and C/F (-) for confirm at the same time, P1-P8 which can be adjusted the settings of each code as P0 according to the needs which their are cleanly.

The touche C/F is a touche for changes Fahrenheit or Celsius.

Press a times on the touche C/F, and it displayed F (mode Fahrenheit), then press a times on the touche C/F, it displayed C (mode Celsius), the mode by fault is C (mode Celsius), it there has a grosse error of temperature when you the users, it is can-be the mode F.

A exemple of adjustment :

If you avez need of control the equipment of refrigeration

1 : Please pass in mode C in the code P0 :

2 : In the case of the display of the temperature actual, you unscrew press on the touche SET and the digital following of the texte of adjustment turn signal, then press on C/F (+) and SET (-) for adjust the temperature of stop of the cooling, after the adjustment, please attendre 3 seconds, it confirm automatically the return.

3 : Adjustment of the difference of return : All of first, please press on the touche SET during five seconds all the time, and that enter in the menu principal of adjustment, then press on STC (+) and C / F (-) for pass to P1, when In pass to P1, please press a times on STC (+) and C / f (-) both, the digits P0 turn signal, then press on STC (+) and C / f (-) for adjust the value of difference (the difference of return means that you unscrew add several degrees for start, for example, if the system stops when the temperature of adjustment of stop is of 25 degrees, you unscrew adjust the temperature of cooling to 28 degrees, the value in the code P1 must be adjusted to 3 degrees, therefore the value of difference of return is of 3 degrees), after have completed, please finally press on STC(+) C/F (-) at the same time for confirm.

4 : The steps here-above are configuration, the datare automatically record and the result final is, in the control of the equipment of refrigeration, superior to 28 degrees for start the refrigeration, the refrigeration to 25 degrees for stop.

If you avez need of control the equipment of heating :

1 : Please pass in mode H in the code P0.

2 : In the case of the display of the temperature actual, you unscrew press on the touche SET, and the digital following of the texte of adjustment turn signal, then press on C/F (+) and SET (-) for adjust the temperature of stop of the heating, after the adjustment, please attendre 3 seconds, it confirm automatically the return.

3 : Adjustment of the difference of return : All of first, please press on the touche SET during five seconds all the time, and that operation.