1/4
XHW3005 Humidity Hygrostat 230v Digital Hygrometer Sensor Switch Controller 0 to 99% R(220V)
Of which environmental contribution £0.10 including VAT.
Sold by Sinocor GmbH
You may also like
Compare with similar items
Product information
Description
Specification:
Model: XH-W3005
Weight: 68 g / 2.4 oz
Input Voltage: 12 V, 24 V, 220 V (optional)
Humidity Range: 00% to 99% RH
Humidity Control Accuracy: 0.1% RH
Load Power: 120 W / 240 W / 1500 W
Output Type: Direct Output
Mounting Hole Spacing: 73 mm / 2.9 inches
Size: 60*45*31 mm / 2.4*1.8*1.2 inches
Operating Instructions:
With the thermostat connected to the circuit and the power supply, the digital display shows the starting temperature setting. Current humidity:
Press the "up" button to display the starting temperature. Press and hold the "up" button for approximately 3 seconds, and the starting humidity value will flash. This value can be adjusted using the up and down buttons.
Set the stopping humidity:
Press the "down" button to display the stopping humidity. Press and hold the "down" button for approximately 3 seconds to stop the humidity display from flashing. This value can be adjusted using the up and down buttons.
Restore factory settings:
When the unit is powered on, press and hold the up and down buttons simultaneously. The digital display will show 888 and then automatically switch to the humidity detection value, thus restoring the factory settings.
Package List:
1 x Digital Humidity Controller
Note:
The W3005 has a direct output, so please do not turn it on if the output end is not properly connected or is disconnected, as this could cause unnecessary problems due to a two-stage contact spark and careless wire contact.
Features
- BrandTEHTUY
- MaterialCross-linked Polyethylene
- Warranty1 year(s)
- Display typeDigital thermometer
- ManoMano ReferenceME99086449
You are here:
'/%3E%3C/svg%3E){kind=small}