Zinc Alloy Latch Lock for Sliding Barn Door, Invisible Door Lock Handle with 3 Keys for Sliding Barn Door Wooden Furniture Hardware (Silver)

This door lock will give your wooden barn door a rustic look. Very strong and beautifully made, this door lock can be locked from the inside or the outside. When locked from the inside, it can be unlocked with a key from the outside. Constructed of high-quality zinc alloy and finished with a galvanized coating, it is corrosion-resistant, dustproof, and oil-resistant. This sliding door lock is suitable for left- or right-handed doors; the installation steps are described in the product description. Sliding door lock, outdoor boat lock, childproof sliding door lock, barn locks, 3M locks, closet, patio, Wen security handle replacement with an old pin for childproof bar/shower lock, double metal keyed. Specification: Condition: 100% Brand New. Handle Material: Aluminum Alloy. Panel/Bolt Material: Zinc Alloy. Lock Cap Material: Zinc and Copper. Suitable Door Thickness: 35-45mm / 1.4-1.8inch. Package Weight: Approx. 571g ~ 582g. Package Included: 1 x Sliding Door Lock, 3 x Keys, 4 x Screws. Installation: 1. Place the lock in the pre-drilled hole, tighten it using the self-tapping screw, then press the hook to smooth it, then retract the lock into the lock body. 2. Pull the key, the lock onto the footrest or vertical beam, the lock body through the transverse hole, and the outer plate near the outside of the door. 3. Adjust the direction of the knob according to the locking rule and insert the knob hole of the inner compound plate into the locking rule. Then, the two screw holes of the inner compound plate are aligned with the two studs of the front outer panel, and then the inner and outer panels are secured with two M4 screws. If the locking rule is too long, it must be cut to size. 4. Install the latch plate and latch housing: install the latch plate and latch housing in a symmetrical position on the door frame so that the latch can be smoothly inserted and retracted. 5. After installation, test the door. First, insert the key into the tester and open it. The locking hooks should be fully engaged and smooth. Next, remove the key and use the button to try opening it. The locking hook should enter and move smoothly.