Zinc Alloy Latch Lock for Sliding Barn Door, Invisible Door Lock Handle with 3 Keys for Sliding Barn Door Wooden Furniture Hardware (Silver)

This door lock will give your wooden barn door a rustic look. Very strong and beautifully made.

This door lock can be locked from the inside or the outside.

When locked from the inside, it can be unlocked with a key from the outside. Constructed of high-quality zinc alloy with a galvanized finish, it is corrosion-resistant, dustproof, and oil-resistant. This sliding door lock is suitable for left- or right-hand doors; the installation steps are described in the description. This sliding door lock is suitable for left- or right-hand doors; the installation steps are described in the description. Sliding door lock, exterior lock, boat lock, keyed sliding door lock, child lock, barn locks, 3M locks, closet, patio, WEN security handle replacement with an old pin for child locks, bar, shower, keyed metal double lock. Specification: Condition: 100% Brand New. Handle Material: Aluminum Alloy. Panel/Bolt Material: Zinc Alloy. Lock Cap Material: Zinc. Suitable door thickness: 35-45mm / 1.4-1.8inch. Package weight: approx. 571g ~ 582g. Package includes: 1 x sliding door lock, 3 x keys, 4 x screws. Installation: 1. Place the lock in the pre-drilled hole, tighten it with the self-tapping screw, then press the hook to smooth it, and then retract the lock into the lock body. 2. Pull the key, place the lock on the footrest or vertical beam, and insert the lock body through the cross hole and the outer plate near the outside of the door. 3. Adjust the direction of the knob according to the locking rule and insert the knob hole of the inner compound plate into the locking rule. Next, the two screw holes in the internal component plate are aligned with the two studs on the front exterior panel. Then, the inner and outer panels are secured with two M4 screws. If the locking rod is too long, it must be trimmed accordingly. 4. Install the latch plate and latch housing: Install the latch plate and latch housing in a symmetrical position on the door frame so that the latch can be smoothly inserted and retracted. 5. After installation, test the door. First, insert the key into the lock and turn it. The latches should be fully depressed and move smoothly. Then, remove the key and use the knob to try opening the door. The latch should engage and move smoothly.