1-60 MHz SWR Antenna Analyser, Shortwave SWR Meter Tester, Amateur Radio Analyser with 100 Hz to 100 kHz Resolution for Amateur Radio Professionals

Spec: Description: This is an SWR analyzer for ham enthusiasts. With 5 buttons—"Mode," "Band," "Config," "Scan," "Up," and "Down"—you can select the operating mode, band, and extended functions. It is powered by an external 12-14V 500mA DC power supply with a 2.1mm power jack and can be used to measure antenna electrical parameters, SWR, impedance (resistance + reactance), capacitance, inductance, feed point impedance, ground loss, etc. Features: The usable SWR measurement range of this analyzer is 1.0 to 9.99. Step size: user-configurable increments of 100Hz, 1kHz, 10kHz, and 100kHz. Configurable increments of 100 Hz, 1 kHz, 10 kHz and 100 kHz SWR Usable measurement range: 1.0 to 9.99 Impedance: approx. 5 to 2000 ohms RF Output: Adjustable 2.0 Volts pp (typ) Power Supply: Externally powered 12 to 14 V DC, 500 mA Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down" Switch: "Power On" Connectors: RF USB: Mini-B plug External Power Supply: 2.1 mm power jack (center positive pin) Size: 150 x 90 x 40 mm / 5.9 x 3.54 x 1.57" Applications: 1. Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance 2. Measure feed point impedance 3. Measure ground loss 4. Adjust antenna tuners and determine loss 5. Measure inductances and capacitors 6. Measure transmission line coaxial (SWR, length, velocity factor, approximate Q and loss, resonant frequency and impedance) 7. Measure and determine the tuning parameters: SWR, approximate Q, resonant frequency, bandwidth, impedance 8. Determine the characteristic impedance of the transmission line 9.