Nine Ways Slide Hammer Puller Set 17 pcs vidaXL

Extraction of a gimbal head blocked on a quad (rusty + inlaying of earth), I had to tap for at least 1 to 2 hours for the extraction, the tool held the shock, the "cross" 3 points s 'is very slightly deformed and the first thread of the "cross" has flattened a bit suddenly it is difficult to screw it now but the thread of the rod with the mass remained intact. I recommend.

The whole looks strong, not yet tried but for the occasional it looks super correct.

Content of this product until the second use. The screw and the thread of the lower flange gave up the soul by removing a recalcitrant gimbal. This material is very correct for occasional use without much effort. Thoroughly lubricate the threads before use.

Good product, easy to use without problems. Very satisfied, assembled and disassembled without difficulty.

After having shot a screw on my drums of 306 completions seized, put exhausted hammer / chisel on, have heat, etc ... I came to the end thanks to this one! So very very satisfied with the product, I recommend.

tool that I got in foresight to deposit car brake drums. At first use I could confirm the usefulness of such a tool.