12V 600L/H 1.2A Submersible Water Pump High Flow Rate Micro Motor Water Pump for RV, Pond, Aquarium, Fountain

Description: DC submersible pump, car wash equipment pump (the pressure is not as high as that of a high-pressure car wash gun, please note). Rated voltage: 12V, operating voltage 6-15V, up to 18V. Rated current: 1.2A, the supported supply current should not be less than 1.5A. Maximum lift: over 5 meters (the higher the voltage, the greater the lift). Maximum flow rate: 600 liters/hour (horizontal flow). The wires are divided into: Black wire: three-conductor wire, bare wire end, length 1.5 meters, wire diameter 5.7 mm (very thick).White wire: 1.5 meters long, with a 5.5*2.1 female connector. Size: 98 (H) * 38 mm.Outlet outer diameter: 12 mm, inner diameter 9.7 mm. The JT-500 DC submersible pump is mainly used for car washes, aquarium water changes, washing machines, vegetable/garden watering, rock gardens, showers, hydroponics, etc.It can be connected to a car's power supply and a 12V battery, making it easy to move.This water pump is a submersible pump, not a self-priming or land-based pump.The water temperature should not exceed 40 degrees Celsius.Low noise, less than 35 dB at 10 cm. Pay attention to the positive and negative terminals when connecting the power supply, otherwise it will affect the flow to the head.The brown wire is connected to the positive terminal, the blue wire is connected to the negative terminal, and the yellow wire is connected to the negative terminal.The green wires are ground wires and do not need to be connected. Note: All data is measured manually; please allow a 1-3 cm error due to differences in light and display. There may be color differences; please refer to the actual item received.