12V DC Wireless RF Switch, 12-Channel Relay, Wireless RF Remote Control Transmitter and Receiver

General Description

This 12V 10A wireless relay is designed to offer high control power and stable performance. Thanks to its push-button design, it allows you to equip a single switch with multiple remote controls or a single remote control with multiple switches. Its high-quality chip and double-sided printed circuit board ensure durability and compatibility, while the wireless signal learning function provides excellent resistance to interference.

Technical Specifications

• Type: 12-Channel Remote Control
• Output Current: 20 A
• Standby Operating Current: ≤ 6 mA
• Output Voltage: 125 V AC / 14 V DC
• Operating Voltage: 12 V
• Battery Type: 1 x 23 A/12 V battery (not included)
• Operating Frequency: 315 MHz / 433 MHz
• Remote Control Range: Approximately 200 to 500 m
• Operating Temperature: -40 °C to +80 °C
• Receiving Sensitivity: ≥ 105 dBm
• Operating Modes: Momentary, Self-locking, Interlock
• Relay Dimensions: approx. 10 x 8 x 2.5 cm
• Remote Control Dimensions: approx. 12 x 5 x 1.5 cm
• Weight: 243 g

Operation

The relay operates in several modes:

• Momentary: Press each button on the switch to connect the corresponding relay. Release to close the relay.
• Interlocking: Press each button to connect the corresponding relay. The other relay is closed.
• Self-locking: The same button controls one relay; one press opens, another closes.
• Learning: Press the learn button on the receiver, then press the switch button to activate learning.
• Erasing: Press and hold the learn button on the receiver for approximately 10 seconds to erase the stored information.

Other information