MManoMano Customer
Published on 18/11/2024, FranceWorks perfectly well with LED, the previous one was a Legrand which lasted me 7 years, I hope this one lasts as long.
1/5
160° Recessed Motion Sensor Wall Switch for LED and Halogen Bulbs
Of which environmental contribution £0.10 including VAT.
Sold by Permu UK
You may also like
Compare with similar items
Product information
Description
General Description
This recessed motion detector is designed for LED and halogen lamps and bulbs. It operates from 1W, making it ideal for LED installations. This model is not suitable for speed control and directly replaces an on/off switch. It is equipped with an adjustable twilight switching threshold and a switching time of 10 seconds to 7 minutes.Technical Specifications
- Detection angle: 160°
- Maximum range: 9 m
- Recessed dimensions: 49 x 49 x 30 mm
- Decorative panel: 80 x 80 mm
- Installation height: 100-180 cm
- Voltage: 230 V ~ / 50 Hz
- Standby power consumption: 0.1 W
- Operating power consumption: 0.45 W
- Power range: 1 to 500 W for ohmic loads (incandescent bulbs), 1 to 200 W for inductive loads (LED lamps, fluorescent tubes) fluorescent)
- Protection: IP20
- Suitable for indoor use only
Features
- BrandTINOR
- ColourWhite
- Number of modules1
- Width4.9 cm
- With indicator lightNo
- Complete / ComposableWaste kit
- SmartNo
- WaterproofNo
- Height3 cm
- IP ratingIP20
- MaterialPlastic
- Switch mechanismSwitch
- Type of electrical installationBuilt-in
- Number of terminals1
- PackNo
- Weight500 g
- Voltage230 V
- ControlManual control
- ManoMano ReferenceME58054253
- MMID943626923423
- Product codeTIFR-MM-11495
- EAN6476846355477
Customer reviews
4,3
/ 7 Reviews
MManoMano Customer
Published on 17/03/2023, FranceIt cannot replace a switch, because it does not work with 2 wires (phase and lamp)
1 person found this helpfulRREGIS
Published on 18/04/2023, FranceNo sensitivity adjustment Lightweight mounting system plastic
You are here:
'/%3E%3C/svg%3E){kind=small}