160° Recessed Motion Sensor Wall Switch for LED and Halogen Bulbs

General Description

Recessed wall-mounted motion detector switch, designed for LED and halogen lamps and bulbs. It starts at 1W, making it ideal for LED lighting. This model is not suitable for gear changes.

Technical Specifications

• Detection angle: 160°
• Maximum range: 9 m
• Recessed dimensions: 49 x 49 x 30 mm
• Decorative panel: 85 x 85 mm
• Installation height: 100-180 cm
• Protection: IP20
• Voltage: 230 V ~ / 50 Hz
• Standby power consumption: 0.1 W
• Operating power consumption: 0.45 W
• Power rating: 1 to 500 W for ohmic loads (incandescent bulbs), 1 to 200 W for inductive loads (LED lamps, fluorescent tubes) fluorescent)

Usage

This PIR detector operates in on/off mode with an adjustable twilight switching threshold. The switching time can be adjusted between 10 seconds and 7 minutes.