1/8" NPT Stainless Steel Pressure Transducer with Cable, Pressure Transducer Transmitter Sensor for Water, Air, Gas, Fuel, Petroleum, Oil, DC 5V (150 psi)

Features: 1. This is an advanced pressure transducer compared to traditional mechanical pressure transducers. 2. Small output error of ±2% FS, including non-linear error, hysteresis, and repeatability; full temperature range. 3. Lightweight and small in size, easy to install and operate. 4. It has complete overvoltage protection. 5. Works for oil, fuel, diesel, gas, water, and atmospheric pressure; can be used in oil tanks, gas tanks, diesel tanks, etc. Specifications: Features: This is an advanced pressure transducer compared to traditional mechanical pressure transducers. Small output error of ±2% FS, including non-linear error, hysteresis, and repeatability; full temperature range. Lightweight and small in size, convenient to install and operate. It has complete overvoltage protection. Works with oil, fuel, diesel, gas, water, and air pressure; can be used in oil tanks, gasoline tanks, diesel tanks, etc. Specifications: Material: Stainless steel; Voltage: DC 5V; Pressure: 30 psi, 100 psi, 150 psi, 200 psi, 300 psi, 500 psi (optional); Thread type: 1/8" NPT 30 psi; Input: 0-30 psi; Output: 0.5V~4.5V linear voltage output. Outputs: 0 psi 0.5V, 15 psi 2.5V, 30 psi 4.5V; Accuracy: 2% of reading (full scale); Thread: 1/8"-27 NPT; Wiring connector: Waterproof quick disconnect. Matching connector included. Wiring: Red for -5V; Black for ground; Blue for signal output. 100 psi Input: 0-100 psi Output: 0.5V ~ 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V. Accuracy: to within 2% of reading (full scale). Thread: 1/8"-27 NPT Wiring Connector: Waterproof quick disconnect. Mating connector and wiring harness (pigtail) are included. Wiring: Red for -5V; Blue for signal output. Input: 0-150 psi. Output: 0.5-4.5V linear voltage output. Outputs: 0 psi 0.5V, 75 psi 2.5V, 150 psi 4.5V. Accuracy: -/-0.5% FS Thread: 1/8" NPT Wiring: Red for -5V; Black for ground; Green for signal output Overload capacity: 2 to 4 times the rated pressure Operating temperature: -40 ℃~-120 ℃ Compensation temperature: 0 ℃~-80 ℃ Protection class: IP67 Pressure medium: oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply power - 6.5 V/0.02 A) Ω Long-term stability: less than 0.1% FS/year Temperature effect on zero: typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Temperature effect on sensitivity: Typical: 0.02% FS/℃; Maximum: 0.05 %FS/℃ Shock resistance: 1000 g Shock resistance: ≤-/-0.01 %FS (X, Y, Z axes, 200 Hz/g) Response time: ≤1 ms Insulation resistance: >100 mΩ 500 VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1 200 psi Input: 0-200 psi Output: 0.5 V ~ 4.5 V linear voltage output.Outputs 0 psi 0.5 V, outputs 100 psi 2.5 V and outputs 200 psi 4.5 V NPT Overload capacity: 2 times the rated pressure Pressure medium: oil, gas and water compatible with 316L stainless steel Load resistance: ≤ (supply supply - 6.5 V/0.02 A)Ω Long-term stability: ± 0.2% FS/year Temperature effect on zero: typical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃ Temperature effect on sensitivity: typical: ±0.02% FS/℃; Maximum: ±0.05%FS/℃ Shock resistance: 100 g Shock resistance: ≤±0.01%FS (X, Y, Z axes, 200 Hz/g) Response time: ≤ 1 ms Insulation resistance: >100 mΩ 500 VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3 Wiring connector: quick-disconnect, waterproof. The corresponding connector and wiring harness (pigtail) are included. Wiring: red for IN-; black for GND; green for OUT. 300 psi Input: 0-300 psi Output: 0.5-4.5 V Linear voltage output. Outputs: 0 psi 0.5 V, 150 psi 2.5 V, 300 psi 4.5 V Accuracy: -/-0.5%FS Thread: 1/8" NPT Wiring: Red: -5V; Black: Ground; Green: Signal output Overload capacity: 2 to 4 times rated pressure Operating temperature: -40~-120℃ Compensation temperature: 0℃~-80℃ Protection class: IP67 Pressurized medium: Oil, gas, and water compatible with 316L stainless steel Load resistance: ≤ (supply -6.5 V/0.02 A) Ω Long-term stability: Less than 0.1% FS/year Temperature effect on zero: Typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Temperature effect on sensitivity: Typical: 0.02% FS/℃; Maximum: 0.05% FS/℃ Shock resistance: 1000 g Shock resistance: ≤-/-0.01%FS (X, Y, Z axes, 200 Hz/g) Response time: ≤ 1 ms Insulation resistance: >100 mΩ 500 VDC Explosion-proof class: ExiaTTCT6 Electromagnetic compatibility: EN50051-1. 500 psi Input: 0-500 psi (gauge pressure) Output: 0.5-4.5 V linear voltage output. 0 psi output 0.5 V, 250 psi output 2.5 V and 500 psi output 4.5 V. Accuracy: -/-1% FS Thread: 1/8" NPT Wiring: Red for -5V; Black for ground; Yellow (green) for signal output. Overload capacity: 2 to 4 times the rated pressure. Operating temperature: -40℃ ~ -120℃. Compensation temperature: 0℃ ~ -80℃. Protection class: IP67 Pressure medium: Oil, gas, and water compatible with 316L stainless steel Load resistance: ≤ (supply - 6.5V/0.02A)Ω Long-term stability: Less than 0.1%FS/year Temperature effect on zero: Typical: 0.02%FS/℃; Maximum: 0.05%FS/℃ Temperature effect on