3/4 Float Valve, Water Level Control Box is an upgraded version of the traditional float valve, used in swimming pools, livestock tanks, aquaculture, aquariums

Small size and easy to install: Float valve, estimated flow rate up to 40 psi 3 gallons per minute to 60 psi 5 gallons per minute

Automatic filling stop when full: Float valve, automatic control, less filling water, water stop

Environmentally friendly: Safe and does not release any toxic substances.

Wide application: Widely used in water boiler machines, rice steamers, water tanks, water towers, toilet tanks, etc.

Buy without worries: We have confidence in this product, please feel free to contact us whenever it breaks. At the same time, since this product is a valve that can move automatically, regular inspection and maintenance are necessary. Check the front display and whether the valve lights up and closes normally every month.

Product Description

Dimensions: 3/4 white side.

Automatic float valve water level control valve.

Working pressure range: 1 – 10 kg (0.1 – 1 MPa).

Applicable medium: clean water.

Applicable medium temperature: ≤ 70 °.

High temperature medium temperature: 10 ° ~ 70 °

Type: vertical indoor installation.

Material: nylon + rubber.

Outlet diameter: 1/2 3/4 BSP thread.

Size: please refer to the picture on the left to see the detailed image.

Color as the picture.

Working principle:

When the surface of the water tower or pool descends, the float in the valve chamber sinks.

Use the hole rod to open the pilot hole of the control valve. Climb up, press the joystick to close the pilot hole, the valve cavity begins to fill with water and then close the control valve. The sealing surface of the control valve immediately stops the water supply.

Package Contents:

1 x Water Level Control Valve

1 x as the picture shown.

Only the above package content, other products are not included.

Notes:

This product is a liquid level control valve.

After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet pipe. First fix the water inlet pipe on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard.

The main water inlet should be aligned with the normal diameter of the control valve.

When using, the stop valve should be fully opened.

If two valves are installed in the same tank, they should be kept at the same level.

Before installation, clean the impurities in the pipe to avoid blockage