35mm hinge jig, cabinet door hinge jig, concealed hinge jig, hole punch, drill guide locator for DIY woodworking

【How to Install

1. Install a 35mm hole saw;

2. Adjust the drilling depth to 12-13mm, then lock the limit ring;

3. Adjust the fixed size of the black pressure block on the quick-release clamp (Note: the tool's adjustable fixed block size is 15-25mm);

4. Move the drill to the marking and drilling position on the board and lock the quick-release clamp;

5. Squeeze the drill handle and press the hole to a depth of 12-13mm at a constant speed;

6. Drill a 2mm screw hole on the left and right sides, then install the 35mm hinge.

【Package Contents】

Hinge Drill Locator Body * 1

35mm Hole Opener * 1

Limit Ring * 1

Limit Ring Fixing Screw * 1

Wrench * 2

2mm Drill Bit * 1

Hex Bar Wrench * 1