4 in 1 wall detector, wall mounted metal detector with LCD display, stud finder for detecting electrical cables, wall scanner for wood, metal and power cables.

Wide application: This stud finder allows you to locate the center of wooden studs in wooden and plasterboard partitions, as well as the position of metal and electrical cables. So you can accurately install TVs and furniture, drill holes in walls, etc.

4 detection modes: This stud finder offers 4 different modes: stud detection, depth detection, metal detection and electrical cable detection.

Multifunctional: The stud detection mode can locate the center and edge of wooden and metal studs up to 19mm deep; the maximum detection depth of depth mode is 38mm; the maximum metal detection depth is 60mm.AC detection can locate cables up to 51mm deep.

Display and Alarm: During detection, the screen shows the mode, signal strength, direction, etc. The intensity of the sound signal varies depending on the distance. You can mark the place where the sound is loudest. The device also has an AC warning function.

Easy calibration: Before each use, it is necessary to calibrate the detector. Select the mode, then press and hold the scan button (located on the right of the device) to calibrate the device. Calibration is complete when the gray bar disappears and a beep sounds.In metal/AC mode, it is necessary to place the device in the open air to calibrate it.

Product description

Numerous applications

This detector can locate the center of wooden studs in wooden and plasterboard partitions, as well as the position of metal cables and power cables, thus facilitating the precise installation of televisions, cabinets, drilling holes in walls, etc.

Calibration

It is necessary to calibrate the detector before each use. First select the mode, then press and hold the scan button (located on the right side of the device) to perform the calibration. Calibration is complete when the gray bar disappears and a beep sounds. If you accidentally shake the detector, you will need to recalibrate it.In metal/AC mode, you need to place it in the air to calibrate it.

Specifications

Color: Black and silver

Package contents:

p>>Wall detector*1

Battery*1

-Contact our customer service in case you need further assistance