1/5
5A DC motor drive module, CW/CCW rotation, PWM control, dual H-bridge
Of which environmental contribution £0.10 including VAT.
Sold by Cuizi
You may also like
Compare with similar items
Product information
Description
Features:
1. Can independently control two motors; each channel can output 5A, above 9A; standby current is only 10µA.2. Wide power supply range: 3-14V; signal supply range: 2.2-6V; 3.3V and 5V levels can be met.
3. The board provides a 3.3V 100mA power supply to meet the power consumption of your control system.
4. The two-way H-bridge motor can drive two DC motors or one 4-wire stepper motor simultaneously.
5. There is a printed prompt on the back of the circuit board to indicate the pinout.
Specification:
Item Type: Dual Motor Driver ModulePower Supply Module: 3~14V
Signal Input Voltage: 2.2~6V
Mounting Hole Diameter: 2mm / 0.08in
Weight: 14g / 0.49oz (Approx.)
Package List:
1 x Driver ModuleNote:
When the motor is communicating, it must wait for the motor to stop first; otherwise, the instantaneous current will burn the module's driver chip. The exposed pins on the back of the board must not be short, otherwise... Permanent damage may occur. Do not connect the positive and negative terminals of the power supply, or it will overheat and burn out. There is a printout prompt on the back of the circuit board.Features
- BrandOTHERS
- Length15 cm
- Width15 cm
- Height35 cm
- Power25 W
You are here:
'/%3E%3C/svg%3E){kind=small}