7 in 1 Digital Construction Detector, Electric Metal Detector Electric Cable, Detector Wall Materials for Wood Metal Detection

7 in 1 Wall Scanner: Including 1/2 inch (13cm) and 1.5 inch (38mm) scanning mode, it can detect the center position of woods in walls of wood panels and plasterboards; Metal scanning detects metal up to 2.36 inches (60 mm); AC scan detects live up to 2 inches (51 mm), quickly finds metals, studs, joists, pipes and AC wires behind various wall floors and ceilings, except cement board wallsAdditional enhanced features: The ability to measure the moisture content of wood and building materials can be a great help in wood processing, water damage repair and home renovation.In addition, the temperature can be detected and displayed in 2 modes, including ℉ and ℃Precise positioning: When searching for the location of the wood, hold the tool straight up and down, parallel to the studs, stud finder with automatic calibration function, when you approach the target, there will be an arrow on the LCD screen to indicate the target position, move in the direction of the screen arrow to locate accuratelyEasy to Use: Press ON/FF to start, press the mode switch button, slowly slide the wall scanner across the surface of the object to be tested, the LCD screen lights up and there are arrows to guide you to slide.When you locate the center of the stud, the signal strength indicator will be full and the buzzer will sound, automatically after 3min.Turn off the power without any action.Need 2*9V 6F22 battery（Including）Digital LCD Display: The wall detector with a graphical LCD backlight, which can indicate precise directions and display the detection mode, signal strength, center pointing, low battery indication.With the LCD backlight, it provides a clear appearance even in low light conditions, showing the exact locationMaterialMaterials detected. Audio indication with a beep detector.Product Description7 in 1 wall scanner design with 7 scanning modes: 13 cm (1/2 in) scanning mode locates the center and edges of wood; Deep scanning locates the center and edges of wood up to 1.5 inches (38 mm) deep; Metal scanning detects metal up to 60 mm (2.36 inches) deep; AC scan detects live up to 51 mm (2 inches) deep; The ability to measure the moisture content of wood and building materials;Detect temperature, display temperature ℉Detect temperature, display temperature ℃How to use the button:1.Firstly, press ON/FF to start2.mode switch button: 1/2inch stud for scanning metal or wooden studs with a depth of 13mm; 1 inch stud for scanning a metal or wood stud with a depth of 25mm; 1 1/2" stud for scanning a metal or wood stud with a depth of 38mm; Metal mode is used for scanning metal; AC mode is used for scanning an unshielded 220V AC live wire. Hold the tool straight up and down, parallel to the studs, and do not rotate the tool. Hold the tool flat against the wall and do not shake it, tilt it, or press hard as it slides slowly across the surface to be scanned. Avoid placing your other hand, or any other part of your body, on the Surface to be scanned. Sold by the Bianco FR store