8-piece motorcycle bearing puller kit, 9-30mm internal bearing removal kit for bicycle wheels and machine bearings

General Description: The motorcycle bearing puller kit is made of raw cast iron, providing strength and durability suitable for various working environments. Composed of 8 pieces, it is suitable for most bearings in a variety of applications. This kit will allow you to perform all types of complex bearing removal. Technical Specifications: Material: Hog iron; Color: Black; Open clips; Head diameter: 9 mm / 0.35 in, 11 mm / 0.43 in, 14 mm / 0.55 in, 19 mm / 0.74 in, 23 mm / 0.9 in; Shaft head diameter: 4 mm / 0.15 in, 6 mm / 0.23 in, 8 mm / 0.31 in; Bushing inner diameter: 28 mm / 1.1 in, 34 mm / 1.33 in; Suitable bearings: Inner diameter 9-30 mm / 0.35-1.18 in; Packaging size: 24 * 22 * 7 cm / 9.4 * 8.6 * 2.7 in. Gross weight: 1.3 kg / 2.86 lbs. Application: This kit is suitable for plain bearings with an inner diameter of 9 to 30 mm. Instructions: Choose an open clip of the appropriate size for the bearing and snap it into the bearing hole. Then insert the rod into the open clip. Insert the rod into the hole at the top of the shaft. Twist and force the three tabs of the open clip to open it. Secure the sleeve in the correct position. The nut is then turned with a wrench, and the screw is moved upwards until the bearing is removed. Complete the operation. Other information: Foam box: The kit comes in a foam box with special tabs to prevent damage and scratches during transport, making storage and transport easier. Rounded corners: The corners and edges are smooth and burr-free to prevent scratching your hands. Notes: 1. The feet must be open in place; otherwise, the open clip will slip and damage the bearing. 2. Please allow for slight color differences due to lighting during photography and a 1-3 cm error due to manual measurement. Please ensure you do not mind this before ordering.