AC 85V-220V Infrared PIR Motion Sensor Detector Switch for Charging Light

General description This AC 85V-220V Infrared PIR Motion Sensor Detector Switch is designed for charging lights, utilizing human motion infrared rays as control signal sources. It activates the controlled load immediately upon detecting motion within its range. Technical specifications Voltage: AC 85V-220V Detection distance: <12 meters Detection range: 18 degrees Delay time: 5 seconds - 6 minutes (adjustable) Environmental illumination: 2 - 2000 LUX (adjustable) Operating humidity: less than 93% RH Material: ABS Dimensions: 6 x 4.7 x 15.6 cm Installation height: 1.8 - 2.5 m Installation Open type installation with a 16mm hole Wiring: N-Blue (Zero line), L-Brown (Firewire connection), Output - Red (Sensor output line) Power supply: Blue and brown for power supply, Blue and red for load (lamps) Usage LUX setting allows for day or night operation: If set to "SUN" symbol, it operates only during the day. If set to "MOON" symbol, it operates only at night. TIME setting adjusts the induction time range (5±2 seconds to 4±1 minutes), determining how long the sensor remains active after motion is no longer detected. SENS setting adjusts the sensitivity of the sensor, typically not needed for normal operation. Other information Due to lighting and screen settings, the item's color may vary slightly from the pictures. Manual measurement may result in slight deviations.