AC 85V-220V Infrared PIR Motion Sensor Switch for Charging Light

Cable: approx. 3 inches long, Voltage: AC 85V-220V; Detection distance: <12 m (18 degrees); Delay time: 5 s - 6 minutes; Ambient illumination: 2 - 2000 LUX

It uses infrared rays from human movement as control signal sources. br>When you enter the detection field, the controlled charging process begins immediately.

--Specifications--

Material: ABS

Dimensions: 6 x 4.7 x 15.6 MC

Detection range: 18 degrees

Voltage: AC 85V-220V

Detection distance: <12 meters

Operating humidity: less than 93% relative humidity

Installation height: 1.8 - 2.5 m

LUX setting: 2 - 2000 Lux (adjustable)

Induction time range: 5 s - 6 minutes (adjustable)

Installation: open type, (16mm hole); Keep the switch side facing down

--Wiring Instructions--

N-Blue (Zero line)

L-Brown (Firewire connection)

Output - Red (Sensor output line)

Blue and Brown for power supply

Blue and Red for charging (lamps)

--Switch Setting--

1. LUX can set day or night operation

A: If you switch to the "Sun" icon, it only works during the daytime

B: If you switch to the "Moon" icon, it only works at night

2. TIME is the switch for setting the induction time range (5 ± 2 s to 4 ± 1 min), which refers to the time the sensor turns off after the human leaves the sensing range.

3. SENS is the sensitivity of the sensor; it is not normally needed.

--Special Note--

*Due to the difference in light and screen settings, the item's color may be slightly different from the pictures.

*Due to manual measurement, there may be slight deviation in the measurement.