Adjustable 9-50V/40A/2000W DC speed regulating motor controller

9-50V 2000W motor regulator with 40A shell DC brush motor regulator dimming and temperature regulation module
IMDN12 type DC regulator. The regulator is a universal DC voltage regulator 9-50V. Using imported FET/Imported special speed control driver IC/PCB is 2oz 70 micron thickened copper foil, and the high current balance PCB layout makes the output PWM waveform perfect and more efficient. IMDN12-40A DC regulator is positioned as an entry-level industrial regulator with the characteristics of small size, wide voltage, current high, low temperature rise, high reliability and low price.

Technical indicators:

(1) Working voltage: wide operating voltage range DC 9V-50V

(2) Control power: 0.01-2000W (the maximum instantaneous current is 40A, and the long-term operating current should be controlled within 20A). Different operating voltages correspond to different control powers as follows;

When the operating voltage is 12V, 12V x 40A = 480W

When the operating voltage is 24V, 24Vx40A = 960W

When the operating voltage is 36V, 36Vx40A = 1440W

When the operating voltage is 40V, 40Vx40A = 1600W

When the operating voltage is 50V, 50Vx40A = 2000W

(3) Quiescent current: 0.025A (when the working voltage is between DC10V and DC50V, the quiescent current will not exceed 25mA)

(4) PWM duty cycle: 5% 100%

(5) PWM frequency: 12khz

(6) Operating temperature: -20 -- 40 (ambient temperature -20 degrees below zero to 40 degrees above zero) This regulator is industrial grade and can work stably in sub-zero environment, generally a commercial grade regulator. not possible to work stably below zero.

Dimensions of the printed circuit: length 90mm, width 51mm, height approximately 30mm (excluding the potentiometer adjustment part)

illustrate:

1. During shipping, the potentiometer is removed and placed in the case, to prevent the product from being damaged during transportation.

2. When wiring, pay attention that the positive and negative poles of the power supply should not be reversed. Reverse connection is equivalent to a short circuit and the current is very large, which will instantly burn the regulator. Follow the instructions next to the connection terminals to wire.

3. The governor is a DC governor and the power supply must be a DC supply between 9 and 50 V.

The main objective:

1. Speed regulation of various general purpose DC brushed motors

2. Speed regulation of various types of automobile engines (automobile cooling fan speed regulation, automobile fan speed regulation, automobile windshield wiper motor speed regulation, automobile air conditioning fan speed regulation)

3. Production line conveyor belt speed regulation, pipeline exhaust fan speed regulation, conveyor belt speed regulation, parallel speed regulation of multiple computer fans, and electronic fan speed regulation.

4. Various types of DC bulb dimming, various types of DC heating temperature adjustment.