AIPERQ Jeffergarden 12V DC Solar Water Pump, Copper Wire Motor, High-Head Stainless Steel Submersible Well, 180W, for Household, Industrial and Agricultural Use

General Description

The 2SYDC12V/S3-10-180 solar water pump is designed to provide an efficient and durable solution for your irrigation and drainage needs. Made of stainless steel, it ensures safe and environmentally friendly operation. This pump is ideal for a variety of applications, from farms and gardens to swimming pools and aquaculture.

Technical Specifications

• Item Type: Solar Water Pump
• Model: 2SYDC12V/S3-10-180
• Rated Power: 180 W
• Maximum Flow Rate: 3 m³/h
• Maximum Head: Approximately 10 meters (32.8 feet)
• Outlet Diameter: Approximately 25 mm (1 inch)
• Motor Speed: 3500 rpm
• Material: Stainless Steel
• Power Supply: Solar Panels and Batteries

Compatibility and Accessories

• Compatible with various irrigation systems
• Included Accessories: 1 x Solar Pump CC, 3 hose seals, 3 rubber seals, 1 user manual

Installation

To install the pump, follow these steps:

• Completely submerge the pump in water before powering it.
• Check that the power supply voltage matches that of the pump.
• Make sure the red wire is connected to positive (+) and the other to negative (-).

Operation

For optimal use, observe the following guidelines:

• Do not leave the battery submerged in water after use.
• Avoid pulling on the cable when installing or removing the pump.
• Use a bamboo basket to prevent clogging if debris is present.

Other Information

It is forbidden to use household electrical power for this pump. Make sure not to run the engine dry, as this could damage the oil seal.