Altimeter, thermometer, barometer for outdoor fishing, weather forecast device, multifunctional outdoor instrument, portable/handheld--DTEKGAZ

Once the barometer is switched on, the current air pressure is immediately displayed on the screen. Press the [ALT/+] button to switch between barometer and altimeter modes. By default, the altimeter displays the air pressure; press the [ALT/+] button to display the altitude above sea level of your current location. In altimeter mode, you can change the altitude by pressing the SET and ALTITUDE/+ buttons simultaneously: press the "+" button to increase the value and the "-" button to decrease it. The relative altimeter allows you to directly measure the change in altitude relative to a specific point or the relative altitude of a mountain, object, etc. To use the relative altimeter, reset the measured altitude value to zero. Your current location serves as the zero point (0 m). The change in altitude relative to this point is the relative altitude. To reset the altitude to zero, press and hold the [ALT/+] button until "0 m" appears at the bottom of the screen. Then move around; The screen displays your relative altitude during movement. Press and hold the [ALT/+] key again to return to the display of your actual altitude. The weather forecast indicates the weather conditions for the next 12 to 24 hours within a radius of 30 to 50 km. 1. Due to marine or continental weather phenomena, the forecast may be inaccurate. Please contact your local weather station for more accurate information. 2. The weather forecast is valid for the next 12 to 24 hours and does not reflect current conditions.