Aquarium Fish Tank Seabed Water Grass Background Decoration PVC Paint Sticker 61 x 30 cm

Features: 1. Self-adhesive side marker sticker, easy to apply and simple to use. 2. Thickened stickers, bright color, non-reflective, waterproof, and colorfast. 3. Provides a simple and effective background design for your aquarium with an attractive theme. 4. Made of high-quality PVC, non-toxic, odorless, and water-stain-free. 5. A DIY sticker that allows you to cut it to fit the size of your tank. Specifications: Item Type: Sticker Condition: 100% Brand New Color: As shown Material: PVC Size: 61 x 30 cm / 61 x 40 cm / 76 x 46 cm / 91 x 50 cm / 122 x 46 cm (Optional) Size 1: Approx. 61 x 30 cm / 24.0 x 11.8 inches Size 2: Approx. Size 3: approx. 61 x 40 cm / 24.0 x 15.7 inches; Size 4: approx. 91 x 50 cm / 35.8 x 19.7 inches; Size 5: approx. 122 x 46 cm / 48.0 x 18.1 inches. Gluing Method: 1. Wipe the glass surface on the back of the aquarium, add a little detergent to the water (to reduce the viscosity of the glue), spray onto the glass surface (do not spray excessively) or wipe with a damp cloth. 2. Peel back a corner of the protective film from the bottom, begin gluing after aligning the fixed position, and slowly apply even pressure while gluing. If an air bubble appears during application, you can gently tear it down to the bubble and spray it again to re-adhere and smooth it out. Do not apply in the correct order; the area where the bubble appeared is easily foamed and the bubble will not appear (4). 3. After application, use a squeegee or touch to check for any bubbles. If there are any bubbles, you can use a needle to open them and then press them out with a squeegee. 4. Once the adhesive has set, if the water is not removed, the glue will turn white, peel off, and dry with a hairdryer. It will then continue to adhere flat. Package List: 1 x Aquarium Sticker