PORTABLE METAL BAND SAW 1140 MM WITH BASE 1200W SCHEPPACH MBS1200

The horizontal cutting angle is indeed 90°, but the vertical angle is not good, you will have to rectify this angle with washers on the articulated fixing

The product is designed in proportion to all uses and does not occur. Good for a semi-professional user (hobbistico molto avanzato) Richiede qualche modifica (fine corsa angolazione 0/45 ° originariamente non corretta, fori su telaio per fissaggio al banco, gommino di fine corsa to avoid che il fondo di elastica sbatta sulla base) ma with an oretta dilavoro si sistema tutto. Please note that it is not usable for 8 or more years, but it is left with large dimensions and is taken into account for a quick and precise tag. Best quality ratio/Price

This comment only concerns the SCEPPACH MBS 1200 1200w motor. The vice does not clamp the parts well because the jaws are not parallel. Due to its clamping screw, which on this model is not in line with the jaws, and a slight play, it clamps more at the bottom than at the top. The small parts placed at the top are not clamped well.

Good saw, just missing the screws to fix the saw to the base and the angle adjustment screw, too bad.

Practical product for cutting flat iron or metal angles! But be careful if you want a larger section (square tube 50x50) the cut is less precise. Some complaint about the assembly of the product or the screws were not well seated. The blade wears out relatively quickly and not easy to find

there was a small problem with the vice locking system. J, 'have disassembled and moved aside a little the first coil of the spring which rubbed too hard. I will also adjust the base to match the graduations. Otherwise it is a very good tool and what an advantage to be able to use it manually !!!