Bimetallic corona sierra, 80 mm TCT carburetor, industrial grade stainless steel, high velocity steel corona sierra, aluminum, plastic, madera, etc.

¡Welcome to the Debuns tienda! 🛍️✨ Discover quality products and enjoy an exceptional shopping experience! 💖🚀  " 【RENDIMIENTO ULTRA ALTO】: Nuestra sierra de corona para metal adopta tecnología de variable dientes. Combined with the design of three hojas with internal, medial and external angles of inclination and front and rear angles. The resistance of the cut is low, the efficiency of opening of the hole is high, the rotation and depth of the cut can be adjusted to 25 mm. large triangular design. This is the tool to position with precision and guarantee that the perforation hole neither loosens nor is attacked. Ayuda a cortar orifices Precise, clean and clear for a more secure and reliable perforation. 【VIRUT EXTRACTION DESIGN】: Adopted a design with resort. The broca piloto con springe automatically expels and blocks the length of the course. A new level of virus extraction, larger and better, is incorporated into the side to guarantee a smooth extraction of the virus during the operation and effectively prevent the astillation caused by the blockage of the virus. AMPLIFIED APPLICATION: This metal corona sierra is widely used in interior decoration and installation work. industrial. It can be used to taladrar. Taladros de banco, taladros magneticos, taladros de pistola, taladros de impacto, etc. Approximately. (Note: Do not use concrete, baldosas or stones). Material: TCT/Carburo Diámetro: 80 mm Tamaño del eje: 10 mm Corte depth: 25 mm Color: Plata Package contents: 1 80 mm broca + 1 hexagonal container. Use suggestions: 1. Mechanize stainless steel and steel caps with a thickness greater than 5 mm, refrigerated or watered. 2. When the 16 mm super thick cut, remove the expulsion spring from the pilot broca. 3. Apply antioxidant acid to the product after use to prolong your useful life. Vida util. Aviso: 1. Comprehend the integrity of the taladro before you use it. 2. When loading the battery in the electric battery, you must prepare the three surfaces of the corresponding container. 3. During the perforation, maintain the verticality of the stone and the work piece. 4. Use a forward speed to start the perforation and a media forward speed after you position it. 5. When perforating, the speed must not be too low to avoid the wire being attacked and causing the cuchilla to rotate. 6. When the central broca enters the work piece, the force must not be too large to avoid a violent collision between the hoja and the work piece. 7. Once the broca has been removed from the work piece, it must be removed Let the broca be girando. 8. As the perforation continued, the wire began to cool with the corte fluid. Our commitments have been to offer high quality products, carefully selected to guarantee the best experience ✨💖. customer is ready to help quickly ✅. Unless there is an embargo, due to exceptional circumstances (vacations, extreme climatic conditions, high demand, etc.), a lighter return may be produced. In this case, we will inform you as soon as possible 📢💌. Our commitment is to offer quality products for a purchase without concern 💎. Thanks for your confidence and satisfaction 💕. We hope to have an exceptional shopping experience! 🎁✨ — Desmentidos 💖