Black Set of 12 Corrugated Galvanised Steel Roof Sheet Panels 129 x 45 cm

Product presentation

This set includes 12 black corrugated galvanised steel roof sheets. Designed to make or renovate an outdoor covering, these sheets offer a practical solution for garden sheds, garages, carports, workshops, storage rooms, outbuildings and small agricultural buildings. Their 129 cm length by 45 cm width format allows a significant surface to be covered quickly while making handling easier during fitting.

Galvanised steel is a material suited to outdoor applications. Galvanisation provides protection against oxidation in normal use conditions, while the black finish blends easily into different residential or professional environments. The corrugated shape helps rigidify the sheet and promotes rainwater flow towards the gutter or roof edge.

Key benefits

• Set of 12 galvanised steel covering sheets.
• Sober black colour, suited to new constructions as well as renovations.
• Corrugated profile allowing good rainwater evacuation.
• 129 cm by 45 cm format making transport and placement easy.
• Solution suited to roofs of sheds, storage rooms, garages and carports.
• Total theoretical surface of about 6.97 m2 before taking overlaps into account.

Recommended uses

These sheets can be used to cover a garden shed, storage room, workshop, storage area, garage, carport or outbuilding. They also suit certain light roof renovation projects, subject to respecting the load-bearing structure, minimum slope and applicable construction rules. For a dwelling or construction subject to particular regulatory requirements, it is recommended to check the product compatibility with local prescriptions.

Product features

• Material: galvanised steel.
• Appearance and colour: black.
• Product type: corrugated roof sheet.
• Quantity: 12 panels.
• Dimensions of one sheet: 129 cm length, 45 cm width.
• Indicated thickness: 0.03 cm, i.e. about 0.3 mm.
• Indicated total weight for the set: 14 kg.
• Theoretical surface of the set: about 6.97 m2 without overlap.

Technical specifications

• Electrical voltage: not applicable.
• Power: not applicable.
• Capacity: covering of about 6.97 m2 before overlaps.
• Installation: mechanical fixing on a suitable frame.
• Compatibility: wooden or metal prepared frame or support, subject to checking the spacing, slope and project dimensions.
• Profile: corrugated. The exact corrugation dimensions and required overlaps must be checked before fitting.

Installation and usage advice

Before fitting, check the condition of the frame, its alignment and its ability to support the covering. Provide lateral and longitudinal overlap between the sheets to limit infiltration. The actually covered surface will therefore be less than the calculated theoretical surface. Fix the panels with special roof screws fitted with sealing washers suited to the support. The screws and fixing accessories are not indicated in the supplied contents and must be selected separately.

Place the sheets in the direction of water flow and take into account the orientation of prevailing winds. Use gloves, protective glasses and suitable tools when cutting or handling, as the metal edges can be sharp. Avoid damaging the galvanised surface and black finish. After installation, check the tightness of the fixings, the alignment of the corrugations and the correct drainage of rainwater.

Package contents

• 12 black corrugated galvanised steel roof sheets.