BM550 Automotive Battery Tester – 6/12/24 V, Cold Cranking Amp Test 100–2000 A, Battery Analyzer for Cars and Trucks

【Multifunctional】This battery tester is compatible with all 6V/12V/24V batteries with a cold cranking amps (CCA) rating of 100 to 2000A and a capacity of 2Ah to 220Ah (the corresponding CCA value must be indicated on the battery). It is suitable for standard batteries, flat AGM batteries, wound AGM batteries, and gel batteries. EFB batteries, etc., are not compatible with deep-cycle batteries.

【Plug & Play】This battery tester is easy to use. Simply connect the tester's clamps to the battery and you're ready to go. The test can be performed inside or outside the vehicle, even with a discharged battery. [Extremely Practical] This battery analyzer allows you to measure and evaluate battery performance. It checks the battery's state of health (SOH) and state of charge (SOC), and effortlessly measures internal resistance and voltage. With this battery tester, you can easily monitor battery health and avoid accidents. [Fast, Safe, and Accurate] Equipped with a 1.8-inch HD backlit display and a built-in intelligent microprocessor, this automatic tester ensures fast and accurate measurements with up to 98% accuracy. Results are displayed within two seconds. Reverse Polarity Protection: This 12V tester is protected against reverse polarity. If the two leads are connected incorrectly, it will not function, preventing overheating of the internal circuitry and protecting both the device and the battery. KINGBOLEN BM550 OBD2 6V/12V/24V 100-2000 CCA 2Ah-220Ah: Car Battery Tester – Battery System Detection, Battery Analyzer, Vehicle Diagnostic Tool. The KINGBOLEN BM550 24V/12V/6V car battery tester efficiently analyzes and reads important vehicle data such as voltage, internal resistance, cold cranking amps (CCA), amp-hour capacity (Ah), battery condition, and state of charge. It delivers precise results, calculates the cold cranking amps (CCA), and assesses battery aging, enabling faster and more accurate car repairs. (KONNWEI KW208 KW310 KW600 KW650 AUTOOL BT360 Topdon T1200 Ancel BA201 BST100 FOXWELL BT100)

Product Name: Battery Tester

Model: BM550

Screen Size: 1.8-inch HD Backlit Screen

Test Range: 6V/12V/24V

Connection: Positive and Negative Terminal Clamps

Operating Voltage: 4.9V to 32V

Operating Temperature: -20°C to 50°C

Product Dimensions: 124 × 69.6 × 22.6 mm (4.88 × 2.74 × 0.89 in)

Product Material: PVC Industrial quality. This tool offers technicians and DIY enthusiasts a quick, easy, and cost-effective solution for better understanding battery charge levels, checking battery condition, and identifying faults. Note: All data was measured manually; due to different lighting conditions and screen settings, there may be a deviation of 1 to 3 cm. Color variations are possible; the actual color of the delivered item may differ.