The C.213 concave coving is our best selling polyuethane coving design. It features sharp defined lines which set it apart from the standard plaster coving designs offered by most merchants. Light and easy to install and particularly suited to modern houses with low ceilings.
The C.213 is a classic Orac Decor coving profile made in lightweight polyurethane and supplied with a coat of white primer. The traditional scotia profile has a 3 inch ceiling and three inch wall coverage and measures slightly over 4 inches from tip to tip. As a well established design which sells well. Ideal for kitchen coving and bedroom coving.
C213 coving or cornice is a classic small to medium size design in the Orac Luxxus coving range. The coving profile is 8 x 8cm and has a diagonal of 11.3cm. The C213 coving has a concave centre with a step and convex detailing top and double bottom. It is designed as a classic contemporary coving and can be installed in a veriety of house designs. The C213 classic coving is ideal for normal size rooms with standard ceilings. Examples for installation can be; entrance way coving hall coving living room coving dining room coving bedroom coving kitchen coving or as coving for flats or as apartment coving. This is a very versatile coving shape. C213 coving is also available as a matching flexible coving the C213F flexible coving. Curved walls and bays need curved coving (radius coving) and our Orac flexible coving is a unique solution. Coving for bays and curved walls normally can only be fitted by specialist coving installers. However where the coving needs to be curved our easier flexible coving option can be used. Orac flexible coving can meet most curved coving requirements. Please refer to our specifications for the maximum amount of bend for each curved coving design. Use the link; flexible moulding FAQ. If a tighter bend is required smaller flexible coving will allow a greater degree of flexibility than a larger flexible coving. This is due to the dynamics of material bulk. The C213F flexible coving is manufactured using the same high definition steel moulds as the rigid C213 coving. This allows for the C213 rigid coving and C213F flexible curved coving to be used together as both straight coving and curved coving as the room shape dictates. Suggested mouldings to use with the C213 coving and C213F curved coving are the P4020 rigid dado rail and P4020F flexible dado rail and the SX118 skirting and SX118F flexible skirting and R09 ceiling rose. Many other options can be chosen from the range.
- Length: 200cm
- Height: 8cm
- Width: 8cm