Carburettor For Yamaha Big Bear 400 YFM400 KODIAK 450 YFM450 Grizzly 350 Carb

Introduction:
A carburetor is a device to mix air and fuel for internal combustion engines in the proper ratio for combustion. The fuel and air mixture is too rich if it has an excess of fuel, while too lean if there is not enough. Therefore, our high quality carburetor is the perfect solution for the appropriate ratio of air and fuel mixture and finally provides a good engine performance.

Application:

for Yamaha 2007 - 2009 BIG BEAR 250
for Yamaha 2001 - 2007 BIG BEAR 400 YFM 400 2x4 & 4x4.
for Yamaha 2005 - 2006 BRUIN 250 YFM 250
for Yamaha 2004 - 2006   BRUIN 350.2x4 & 4x4.
for Yamaha 2000-2003 ATV KODIAK 400 2WD 4WD
for Yamaha 2003 - 2006   KODIAK 450 4x4
for Yamaha 2006 - 2009   WOLVERINE 350 2x4 & 4x4
for Yamaha 2006 - 2010   WOLVERINE 450 4x4.
 

Note: Don't fit for Yamaha Warrior 350

Specification:

Material:Zinc Alloy
Inner diameter (intake side): 33mm
Outer diameter (intake side): 37mm
Inner diameter (air filter side): 48mm
Outer diameter (air filter side): 52mm
Weight:0.9kg
Package size:16*12*12cm
Note:
*Please allow 1-2mm error due to manual measurement.
package include:

1x Carburetor.
1x Throttle Base Cover.
1x Throttle Base Rubber Gasket.
1x Throttle Cable Clip.
3x Base Cover Screw
1x FREE Inline Fuel Filter

 

Feature:

1. Sturdy Zinc Construction：Made of high-quality Zinc alloy, the carburetor can stand high heat, pressure, corrosion, acid, and alkali, durable and sturdy in its structure, polished surface ensures long time use.
2. Fuel-Efficient & Strong Power：The integrated carburetor kit works excellent in fuel consumption, greatly improving fuel utilization, reducing fuel costs, and saving more energy, thus effectively enhancing the power of the engine.
3. Fast Start & Steady Speed：With strong and stable power, the carburetor also benefits the start of the engine, it helps to steady the speeds and offer sufficient power in speeding up, dramatically improving the engine performance.
4. Fully Tested & Assembled：From the overall structure to every small part, the carburetor has been constructed with high precision, every component is fully tested and adjusted, organically assembled into one powerful carburetor。
5. Made for Performance:Improve engine performance,Low fuel consumption, Start fast stable idle speed ，allowsing you to get a better driving experience and maneuverability, allowing you to maintain control on bumpy roads.

Carburetor cleaning process:
(1) First remove the carburetor from the car
Turn off the oil and unplug the oil pipe. Twist out the nut connecting the carburetor and the engine with a quincunx or quincunx (depending on the size of the nut), and then twist out the screw that connects the carburetor to the filter. Finally, remove the throttle cable. Turn off. Oil, unplug the oil pipe.
(2) Remove the carburetor float chamber
Use a cross knife to twist out the three screws of the carburetor float chamber cover
(3) Understand the carburetor
After disassembling the carburetor, let’s get to know the names of its parts
(4) Decompose the various parts of the carburetor
Remove the main fuel injection hole, idle fuel injection hole and float of the carburetor
(5) Start cleaning the carburetor
Use the carburetor cleaning agent to aim at each measuring hole and spray (note that the eyes should not be aimed at the carburetor, so as not to spray the cleaning agent into the eyes)
(6) Install carburetor
After cleaning, the carburetor can be installed. Then you can load him into the car.

Note:

*The oil channels of carburetors will be blocked without cleaning.Please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors.
*Please check the measurement information of the carburetor and  confirm your old part number and car engine to ensure you are ordering the correct part. 
*Professional installation recommended/We recommend that this be installed by a qualified mechanic with experience doing this type of work.  (No Instruction Included)
*Please verify the year/make/model of your vehicle and refer to our detailed fitment information on product description page below.