MONZANA® Pneumatic Needle Scaler with Replacement Head Attachment Compressed Air Powered Tools 4000 RPM to 260 l/min Needle Gun Paint Rust Remover Rubberised Handle
You may also like
Compare with similar items
Often purchased together
Product information
Description
Features
- BrandDEUBA
- Width45.5 cm
- Weight3.15 kg
- Pressure6.3 bar
- MaterialRubber
Customer reviews
The process is relatively efficient but would require a higher compressor than the 1500W / 2CV one I have to work quickly. A needle block is actuated, and each needle strikes the bearing surface, with a short stroke of a few millimeters, but several times per second. Needles can squeeze into hard-to-reach corners with sanders or wire brushes. You can remove old paint and rust in the hollow of the ironwork, with a little patience. I have not tested it in mechanical descaling. The weight is correct, but the vibrations tire my wrist; Alternate with a metal brush mounted on a grinder to vary the forces and let the compressor cool. The noise is loud (protections mandatory), but the needles seem quite robust to me. A useful purchase to polish up an old ironwork preparation.
very b
Received without 3/8 male connector, forced to disassemble one on another tool I owned. I find that a little tight on the part of the seller.
Effective, allows you to reach impossible corners, e.g. vehicle chassis before treatment. Good intermediate before sanding with a fixed sandblaster, no more large rust "catons" which clog the sandblasting gun.
Interesting product used to removed blackson's does it very well. for a demo go see my profile there is a video on youtube
the price is very well placed, but the device is not very effective when it comes to stripping.


















