Controller of load solar 12V / 24V 30A MPPT Regulator of battery of panel solar Double display LCD USB -TAM
Buying for your business?
Negotiated prices excl. VAT up to -20%
You may also like
Compare with similar items
Product information
Description
Features:Voltage of system didentification automatic, reconnaissance automatic 12 / 24V.Display LCD user-friendly and operation to double button of interface homme-machine.Data technical completees for installation and the modification.Mode of load smart MPPT to 3 levels to high efficiency.The mode of control of the load can be selected, the function of timer can be reinitialisee for lighting public the night.Control of the capacity of discharge.Meter of discharge dampere-heure.Function of storage of work: enregistrez the service total of operation of system, enregistrez the minuteries marge during the service of operation, enregistrez the time of the battery completely charged.Protection reliable against the surges, protection against the courts-circuits, protection against the surcharges, protection against the surcharges, protection against the excessives excessives.Compensation of of measurement, corrigeant automatically the voltage of load and of discharge, improving the service life of the battery.Protection to connection reversed ronde.The panels solar, the battery, the poles and of controller of load solar are all connected set, adoptant a MOSFET negative in circuit of control in series.Features:Current: 30A Voltage nominale: 12 / 24V Output USB: 2,4 A * 2Courant of overload (V): 13,7 V / * 2 24 V Overcurrent of discharge (V): 10,5-11 V / * 2 24 V Compensation of of: -3mv / ℃ / cellule Gaspillage of load empty: 45ma>200mvaffichage: screen lcdtype of load: mpptgrade waterproof: ip32matériel: plastiquecouleur: black + orangetaille: 17,5 * 14 * 4 cm / 6,9 * 5,5 * 1,6 inches (30a)weight of package: 480g-1284gliste of package:1 * controller of load solaire1 * manual of lutilisateurremarques:1. the function of controller is of protect the exceeding of voltage and the exceeding.2. when the voltage of the battery is too low, the controller beep the output; a times the panel solar charged, the cellule itself retablit to 12,6 v.3. 12,6 v is the voltage of discharge of recovery.4. the voltage normale of controller is of 10,7 v to 13,7 v. these two fluctuations of voltage can be reglees manually.if you rencontrez of problems manual, essayez dajuster the voltage of float to 13,7 v:all dabord, you devez press on the button of control mcu during approximately 3-4 seconds, then it y aura a interface of gestion to screen.deuxiemement, you devez press on the button dajout to screen up to this that the voltage atteigne 13,7 v.finally, you devez press to new on the button of control mcu, this which sauvegardera the data record of controller when display not scintille not.>
Features
- BrandBEIJIYI
- IP ratingIP32
- Amperage30 A
- MaterialPlastic
- Type of solar charge controllerMPPT
- ManoMano ReferenceME247810646
- MMID666182644437
- Product codeGB11675
- EAN9332317456517
'/%3E%3C/svg%3E)
'/%3E%3C/svg%3E){kind=small}