DDS FG-200 Function Signal Generator,Frequency Counter 0.01Hz - 500kHz Signal Source Module Sine + Square + Sawtooth Waveform

TRIMEC , we look forward to your visit. Do not hesitate to contact us if you have any questions ✨

  Features: Compact size, complete functions, simple operation, easy to carry. It can be powered by AC adapter or 3.7V lithium battery. With an oscilloscope, it can be used for testing and debugging of electronic circuits, frequency characteristics and impulse response testing and measurement of audio amplifiers. Due to the good frequency accuracy and stability of the DDS, it is also very suitable for the calibration of the sweep time factor of the oscilloscope. The square wave output is suitable for the oscilloscope attenuator and adjusted the pulse characteristics of the probe. Have a filter (can be opened and closed) to accommodate the sine wave and pulse wave output. This functional design generator can test many types of waveforms such as: sine wave, square wave, triangle wave, direct sawwave, reverse sawwave, etc. It is specially designed for professional workers.
Specifications: Type:withoutantenna/withantenna(optional) Material:ABS The main technical parameters: 1. Output waveforms: sine wave, square wave, triangular wave, direct sawwave, reverse sawwave, ECG wave, exponential rise, exponential fall, Lorentz pulse, Gauss pulse, inc pulse, half wave, full wave, Schumann wave, noise wave, tinside 15 types of waveforms. 2. Power supply: DC4-9V, DC5V is recommended when using an adapter, 3.7V lithium battery is recommended when using the battery. 3. Current: 180MA at a voltage of 5V 4. Frequency range: sine wave 0.01Hz-500.00kHz (with further increase in frequency, the output amplitude will decrease), other waveforms 0.01Hz-100.00k Hz (but does not limit the upper limit of the adjustable frequency, if the distortion and jitter requirements are not high, the use of the frequency can be further increased). 5.Resolution:0.01Hz. 6.Sine wave distortion:<1%below 1kHz,<0.5%above 1kHz. 7.Output Amplitude:Maximum±10V(PP). 8.Output impedance:50ohms. 9.DC offset:maximum±10V,with shutdown function. 10.All configuration settings can be saved. 11.There are filters that can be turned on and off, which can be well matched to sinusoidal and pulsed output. Item Size:140x80x26mm/5.51x3.15x1.02in Item Weight: 144g/5.07oz Package Weight: 245g/8.64oz Package Size: 160x125x35mm/6.29x4.92x1.37in
Package list: 1*signal generator 1*USB power cable 1*BNC clip cable 1*user manual(English)