Digital clamp multimeter, Wax, Multimeter, LCD, Red/Black

Describe

True RMS Clamp Meter

This multimeter accurately measures AC/DC current, AC/DC voltage, frequency or duty cycle, resistance, capacitance, and also provides diode, continuity, and temperature testing. True RMS for accurate measurement of non-linear loads. Easy to use in factories, laboratories, and homes.

Low Impedance and Low-Pass Filters

The low input impedance helps prevent false readings caused by phantom voltages. The low-pass filters (LPF) are used for accurate measurement of variable frequency signals when measuring motors and transformers.

To measure current, the meter must be attached around one of the wires, not along the entire power line. NCV Detection Function: Non-contact voltage detection, without touching any wires, effectively verifies the electrical condition by measuring the intensity of the electromagnetic field; the NCV button is located on the right side. Simply place your thumb on it and press.

Multifunctional

Dual-color backlit LCD screen - When the voltage > 80V and the current > 3A, the backlit LCD screen turns red to warn you of high voltage / LED flashlight / Measures fluid and air conditioning port temperature, including type K thermocouple / Low battery indication / Automatically shuts off after 15 minutes of inactivity.

Safety features

IEC 61010-1 safety standards, CAT III 600V.

Note 1

Before measuring DC current, press and hold the Z/F key until the ZERO character appears to clear the data.

AC Current Measurement: Press the "Z/F" button to switch to AC measurement. Specifications: If the current is > 3A, the orange display will light up. The AC current measurement range is 60A/600A. Accuracy: ±(2.5% + 5). Note 2: To measure current, the meter must be attached around one of the wires, not across the entire power line. A power cord contains two current-carrying wires and a ground wire. The current in the two wires always flows in opposite directions, so the magnetic fields of the two wires cancel each other out, and the meter reads 0A. Attach the individual current conductors to be measured and close the current clamp. The conductor under test must be placed in the center of the clamp; otherwise, additional errors will occur. Jaw Design: The maximum measured voltage and current values are marked on the jaws. Suitable for one-handed operation. Small and lightweight, easy to carry while working. Z/F Button Measurement: Press the "Z/F" button to switch the respective auxiliary function between different measurements, for example, to switch between AC and DC. Auto Shut-Off: After 15 minutes of inactivity, the clip will light up 3 times. No further operation is required; it will beep again and shut off automatically. Multifunctional: Accurately measure resistance, capacitance, diode, and continuity. Easy to use in the lab, factory, and at home.

Specification

Material: ABS,

Power supply type: Battery powered,

Type: AC/DC current,

Measurement type: Multimeter,

Specifications: If the current is > 3A, the orange screen will light up. The DC current measurement range is 60A/600A.

Accuracy: ±(2.5%+5).

Package list:

1 x Digital clamp multimeter,

1 x Test leads (pair),

1 x Thermocouple (pair),

2 x AAA batteries,

1 x User manual,

1 x Carrying case.