Drill Pump for Water and Oil - Fuel Oil/Diesel Pump Nozzle for Electric Drill - Self-Priming with Fittings - For Aquarium, Pond, Statue, Garden Fountain

DescriptionGeneral DescriptionThe electric borehole water pump is made of ABS and alloy, offering high hardness and excellent sealing.Before each use, it is advisable to wipe it with lubricating oil and rinse it with clean water.To extend its life, add a filter to the inlet pipeline when pumping abrasives and liquids containing solids.

Technical specifications

Operating temperature range: 5 to 49 degrees Celsius

Flow rate at 1500 rpm: 15 L per minute

Flow rate at 3000 rpm: 30 L per minute

Recommended speed: 1500 to 3500 rpm

Maximum hose length: 2.75 meters (9 feet)

Compatibility and accessories

Can be used as a water pump

Suitable for swimming pools, aquariums and fountains

Recommended accessories: pipe filter inlet

Installation

Before use, check that the pipe at the inlet is properly sealed and that the pump is correctly installed. It is better to add a sealing ring at the interface to prevent leakage.Also ensure that the air in the oil pump has been purged.OperationThis pump is powered by an electric drill.After starting, check within 15 to 20 seconds if fluid is being drawn into the pump.If not, check the installation of the oil inlet hose.Do not allow the pump to run dry and do not operate it in reverse.Other InformationThe pump is compact, lightweight, and easily portable, making it ideal for use on various work sites, thus saving significant time.