Name: Everbuild General Purpose Silicone Black C3 Size Pack of 6
Brand: EVERBUILD
SKU: 12GPSBK_6
Availability: OutOfStock

General description

EVERBUILD GENERAL PURPOSE SILICONE is a multi-purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high-strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth.

Technical specifications

Permanently flexible

Anti-fungal formula

Quick curing with low dirt pick up

Low viscosity for fast application

Certified under the harmonized European standard EN15651 for façade, cold climate, and sanitary applications

Areas For Use

Sealing around baths, showers, basins, and other sanitary ware

As an adhesive for fixing PVCu trims, cladding, and panels

Sealing around worktops and laminates

Sealing to metal, timber, and PVCu window frames

Pointing around window and door frames

For aluminium gutter sealing

General draught proofing

Limitations

Not for use in aquarium manufacture (use EVERFLEX AQUAMATE instead)

Not for use in conjunction with bitumen or asphalt (use WEATHERMATE)

Not for use on highly porous surfaces such as new concrete or stonework (priming advised or use SILICONE 450)

Not for use on substrates that may bleed oils, solvents, or plasticisers

Do not use in the vicinity of, or in conjunction with the edge sealant of double glazed units (use SILICONE 450)

Do not use for perimeter pointing of PVCu (use SILICONE HM60 or SILICONE 450)

Do not use on soft metals such as lead and brass (use LEADMATE SILICONE)

Non-overpaintable

Surface Preparation

All surfaces must be clean, dry, and dust-free

Remove all loose or flaking surface coatings, and old sealant and mastic joints before application

Clean glass, metal, and aluminium with a proprietary solvent cleaner for optimum adhesion

Porous surfaces may require priming; test a small area first

Application

Refer to the recommended joint ratios

If necessary, reduce joint depth using FILL AND FIX EXPANDING FOAM or joint backer rod

Ensure the joint design permits adhesion to two surfaces only; three-sided adhesion will impair flexibility

Cut the tip of the cartridge carefully to avoid damaging the thread

Apply the nozzle and cut cleanly at a 45-degree angle with an opening slightly larger than the gap to be sealed

Use a standard sealant gun for application

Maintain even pressure on the gun trigger and keep the gun at a constant angle to the surface being sealed

Smooth down within 10 minutes of application using a spatula or a piece of wood wetted with a soap and water solution

For improved appearance, place masking tape on both sides of the joint and remove within 5 minutes of application

Everbuild General Purpose Silicone Black C3 Size Pack of 6

Product information

Description