Gabarit de fabrication de chevilles 8 à 20 mm Lame en carbure pour perceuse électrique Outil pour tiges en bois 8 trous de diamètres différents

• [High-Quality Material] This dowel board is made of high-quality aluminum alloy, which is strong and durable. The surface is anodized, making it rust-resistant and long-lasting.

• [8-Hole Design] This dowel maker has 8 holes of different diameters: 8mm, 9mm, 10mm, 12mm, 15mm, 16mm, 18mm, and 20mm, to meet your various work needs.

• [Convenient]: Our electric drill round shank dowel maker uses carbide blades, which can make dowels and pins easily and quickly, greatly improving efficiency.

• [Easy to Use] Loosen the screw, rotate the red blade holder to the desired diameter, and tighten the screw to begin making dowels. The included blades can also be used in interchangeable positions for easy convenience.

• Round dowel milling auxiliary tool included: 1 x high-speed carbide dowel machine, 1 x blade wrench, 1 x setting wrench, 3 x setting screws.

Package List

• 1 x Dowel Making Jig

• 1 x Blade Wrench

• 1 x Setting Wrench

• 3 x Fixing Screws

Specification

• Item Type: Dowel Making Jig

• Material: Aluminum Alloy

• Color: Black and Red

• Round Hole Sizes: Dia. 8 mm / 0.31 in., Dia. 9 mm / 0.35 in., Dia. 10 mm / 0.39 inch diameter. 12 mm / 0.47 inch diameter. 15 mm / 0.59 inch diameter. 16 mm / 0.63 inch diameter. 18 mm / 0.71 inch diameter. 20 mm / 0.79 inch diameter. Surface Finish: Anodized. Blade Material: Carbide Blade. The sharp alloy blades cut smoothly, available on all four sides, with one side dulled and the other side replaced, 4 times the lifespan. Easy to install, comes with mounting screws. Slight error in shank size; what you see is what you get. Prepare blocks of wood of appropriate thickness. Sharpen one end of the wood block evenly to fit in the electric drill. Try to maintain high concentricity.

Install the cut block of wood onto the collet of the electric drill and lock it securely.

Align the block of wood with the required size of the round hole, start the electric drill, push slowly forward, and unscrew the round rod.