Expand your outdoor storage possibilities and protect your tools with this multifunctional garden shed. The garden tool shed is made of galvanised steel, which prevents rusting and endures long-time use. Steel is an exceptionally hard and strong material, offering sturdiness and stability. Galvanisation provides better protection against corrosion, making it ideal for outdoor use in harsh environments.
Technical specifications
Colour: Brown
Material: Galvanised steel
Overall dimensions: 191 x 300 x 198 cm (W x D x H)
Gate size: 80 x 170 cm (W x H)
Steel panel thickness: 0.23 mm
Features corner protector
Assembly required: Yes
EAN: 8720845894672
SKU: 3188266
Brand: vidaXL
Installation
Protective gloves must be worn during installation, maintenance, and moving.
Please wear safety glasses, gloves, safety shoes, and a helmet (head protection) when you install the shed.
Do not install the shed during extreme weather conditions such as strong winds or low temperatures.
Do not allow children and pets in the assembly area.
The shed must be built on a level surface.
It is recommended to secure the shed to an immovable object or to the ground.
Keep the roof clean from snow and leaves to prevent damage.
Keep doors closed and locked to prevent wind damage.
Do not stand on the roof.
The shed is not suitable for habitation.
Do not store or use hot objects in the shed such as barbecues, welding equipment, and blow torches to avoid the risk of fire.
Usage
This metal shed provides ample space to store your firewood, garden tools, furniture, equipment, and more.
The outdoor shed is equipped with 4 air vents, providing ventilation to reduce the accumulation of moisture and odour.
The sloping roof ensures unimpeded drainage of water.
Other information
To prevent damage from heavy snow buildup, we recommend clearing the roof regularly during winter.
low quality, fragile, instructions difficult to understand. For experienced and equipped DIY enthusiasts. expensive for the quality received.
1 person found this helpful
MManoMano Customer
Published on 26/10/2026, Italy
The quality is just about adequate for the price. For the same square footage, you won't find anything cheaper, but if you need a more solid structure, it's not for you; you'll have to spend triple the price. The bulkheads are the thickness of an oil can, to give you an idea. The uprights aren't sturdy enough, as are the sliding door frames and the sliding mechanism, which isn't precise or solid enough. There's ample clearance between the doors, which tend to sag, and the side bulkheads. The roof screws are the same as the bulkhead screws, so they're not watertight; silicone must be used. The pre-drilled holes aren't precise, but with a little force, you can center the holes. The film protecting the bulkheads is difficult to remove; I recommend peeling off the flaps on the four sides by at least 10 cm before installing them, then removing them once assembly is complete. Assembly is tricky unless you're a decent DIYer, and the instructions (somewhat unclear) call for three people to assemble it, but it's not impossible to assemble it yourself if you change the assembly procedure (I managed to do it; if you want the sequence, ask). Some pieces are missing their identification numbers, but with a little logic and comparing them to the numbered ones, you can figure out their placement. Due to the lightness of the material, set the screwdriver to 2/3 torque, increasing only in certain areas if you want to avoid stripping the screws. There's no floor; you'll have to do it yourself to avoid the hassle of the base crosspieces. Once fully assembled and sufficiently solid, the bulkheads remain delicate and easily deformed if you place rigid and relatively heavy objects on them. Despite the four ventilation openings, condensation forms inside the roof. If during assembly the holes are extremely imprecise, you've done something wrong. Good luck!
MManoMano Customer
Published on 12/10/2026, France
The price-quality ratio is acceptable. Assembly is lengthy. The size is incorrect; it's a few centimeters too wide. There's no base. Packaging, packing, and delivery were perfect.
MmaximePro Customer
Published on 17/09/2026, France
No quality whatsoever, assembly is extremely complicated due to the extreme thinness of the sheet metal. On paper, the uprights seem sturdy, but in reality, they aren't. The diagrams are poorly done because they don't indicate the position of the holes, given that the pieces have multiple sides with different hole patterns. You have to figure out which side is which yourself. For the roof, you'll need to seal the screw heads yourself, as there are no sealing washers. While the holes occasionally line up, most of them need to be re-drilled because they're completely misaligned. And I won't even mention having to grind down some of the poorly bent pieces. Very disappointed; next time, I'll just throw €290 in the trash.
BBruno
Published on 30/01/2025, Italy
Terrible material, not to mention the assembly instructions. Absolutely avoid buying.
3 people found this helpful
DDenis
Published on 16/12/2024, France
Imperfect sealing. Must purchase gaskets for roof fixing screws. No gasket supplied as standard.