1/5

T3 GT3582 GT35 Universal A/R 0 .7 .63 Anti-Surge TURBO Turbocharger for 2.5-6.0L maXpeedingrods

Name: T3 GT3582 GT35 Universal A/R 0 .7 .63 Anti-Surge TURBO Turbocharger for 2.5-6.0L maXpeedingrods
Brand: MAXPEEDINGRODS
SKU: ULBIFP
Price: 152.5 GBP
Availability: InStock

~~£214.00~~

Sold by maXpeedingrods GB

Product information

Description

General description

Maxpeedingrods GT3582 turbocharger is designed for 2.5L-6.0L engines, making it an excellent choice for boosting the power of 4 or 6-cylinder vehicles. This turbocharger can increase horsepower by 20-40%, reaching up to 600HP, providing a cost-effective solution for enhancing your vehicle's performance.

Technical specifications

Turbine Side:

Exhaust Inlet Flange: T3 Flange

Exhaust Outlet Flange: 4-Bolt

Turbine Trim: 84.2

Turbine A/R: 0.63

Turbine Inducer Diameter: 68mm

Turbine Exducer Diameter: 62.4mm

Compressor Side:

Compressor Trim: 56.9

Compressor A/R: 0.7

Compressor Inducer Diameter: 61.5mm

Compressor Exducer Diameter: 81.5mm

Compressor Inlet Size (Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Bearing Type: Floating/Journal Bearing

Thrust Bearing: 270 degree

Cooling Type: Water + Oil Cooling

Maximum PSI: 22

Package Size: 26 x 25 x 23 cm

Package Weight: 8350g

Installation

Ensure to replace the air filter to prevent compressor wheel damage.

Replace the engine oil to avoid damage from impurities.

Run the old turbocharger for 7-10 days before replacing it with a new one.

Make sure the oil drain line is lower than the turbo itself.

Gasoline vehicles must install a water cooling device to prevent overheating.

Ensure exhaust outlets are well sealed by welding.

Professional installation is highly recommended due to the universal nature of the turbo.

Usage

This turbocharger is suitable for 4 or 6-cylinder engines ranging from 2.5L to 6.0L.

It is designed for individual applications and is not vehicle-specific.

Before installation, analyze and eliminate the cause of any previous turbo failure.

Other information

Product Material:

Turbine housing: Ductile iron QT450-10, temperature resistant up to 700°C

Steel turbine wheel: K418 alloy, high oxidation stability and resistance up to 900°C

Compressor housing: ZL104 aluminum

Compressor wheel/blades: Cast aluminum with superior air tightness and corrosion resistance

100% balancing test by TURBOTECHNICS VSR3

G3-min flow VNT turbo testing

Advanced actuator tester/programmer

Features

Brand
MAXPEEDINGRODS
Length
26 cm
Width
25 cm
Height
24 cm
Material
Steel

Visit the MAXPEEDINGRODS store

MaXpeedingRods fuels the passions of tuning enthusiasts worldwide. Since 2006, we have tirelessly researched and produced high-performance auto parts to make your dreams a reality. With a satisfied customer base of over 5 million, our commitment to excellent quality, easy installation, and superior service is unmatched. We are your gateway to transforming ordinary driving into an extraordinary experience. Our parts provide confidence for novices and pros to push their limits on the track or street. At MaXpeedingRods, your voice matters to us. Through collaborating with outstanding racers, we continuously integrate cutting-edge racing technology into our daily upgrades. This innovation delivers affordable access to optimal performance for more and more enthusiasts. Continuous innovation and upgrades are the foundation of our successful MaXpeedingRods product series. The calming comfort of our T6 series complements the junior track capabilities of the T7, while both suit for daily driving. Additionally, our Street Turbo series delivers exhilarating horsepower boosts. Today, we proudly serve a global community of passionate enthusiasts united by the thrill of tuning. Our vision remains unchanged - to open the gateway to tuning for all who share the same passion. The entrance is open, ready to speed up your dream.

You are here: