HABOTEST HT93 Digital Multimeter, Voltage Tester, 2000 Counts, Auto Range, Accurate AC/DC Resistance Measurement, with NCV Live Wire Voltage Test

General Description

The HABOTEST HT93 digital multimeter is a high-performance measuring device, ideal for electricians, DIY enthusiasts, and professionals. It offers non-contact voltage detection (NCV), accurate resistance measurement, and continuity testing. Its ergonomic design and clear display enhance the user experience. Technical Specifications: Model: HT93; Material: ABS; DC Voltage: 2V / 20V / 200V / 600V, ± (0.5% + 3); AC Voltage: 2V / 20V / 200V / 600V, ± (1.0% + 3); Resistance: 2000Ω / 20kΩ / 200kΩ / 2MΩ / 20MΩ, ± (1.0% + 3); Count: 2000; Display: HTN. Auto/Manual Range: Auto Test. Direct: Yes NCV: Yes Phase Test: Yes Continuity: Yes Data Hold: Yes True RMS: Yes Bandwidth: 40 ~ 1kHz Low Battery Indication: Yes Self-Powering: Yes Backlight: Yes Working Light: Yes

Power Supply: 2 *

AAA 1.5V Batteries (not included) Safety Rating: EN61010-2-030, EN61010-2-033, CAT III 600V Pollution Level: 2 Altitude: < 2000m

Operating Temperature: 0 ℃ ~ 40 ℃ (humidity < 18% RH, condensation < 10 ℃)

Storage Temperature: -10 ℃ ~ 60 ℃ (humidity < 70% RH, remove battery) Temperature Coefficient: 0.1 accuracy / ℃ (Humidity < 18°C or > 28°C)

Maximum Voltage Between Measurement and Ground: 600V Overvoltage Indication: "OL" Displayed Input Polarity Indication: "-"

Item Size: 136.2 * 44.5 * 32 mm / 5.36 * 1.75 * 1.26 in

Item Weight: 97g / 3.42 oz

Package Weight: 166g / 5.85 oz

Package Size: 17.6 * 8.5 * 5.7 cm / 6.93 * 3.34 * 2.24 in

Compatibility and Accessories

1 * Smart Multimeter 2 * Test Leads 1 * User Manual (English)

Installation

No specific installation information is provided.

Operation

The HT93 multimeter performs several tests: NCV Detection: Move the probe near the area being tested to detect electric fields. Live Wire Test: Connect the red probe to the test point to measure voltage.

Resistance Measurement: Evaluate the impedance of resistive components and cables. Continuity Test: An audible beep sounds for resistances below 500Ω.

Use the LED flashlight for precise inspections. Automatic shut-off after 15 minutes of inactivity to conserve battery power.